Skip to Main Content
Autodesk
ADD A NEW IDEA

All ideas

Showing 1333 of 1333

Account for multi-connection properties during criticality analysis

Some hospitals for example have multiple service laterals connecting them to the network. If one line is cut off from service due to a repair, the hospital can still get water. As a result, criticality is overestimated when this logic is ignored. ...
Nathan Gerdts about 2 years ago in InfoWater Pro / Other 0 Gathering support

Apply two-valve isolation for criticality analysis

For some projects we need to isolate the repair area with two closed valves in all directions in case one valve were to fail. Please incorporate this as an option in criticality analysis when summing affected customers
Nathan Gerdts about 2 years ago in InfoWater Pro / Other 0 Gathering support

Increase amounts of alert Criteria - so you can have alerts on time series data, not just set values

Adding additional alerts options to the alert criteria capabilities Sensor Flatline, drift, on/off, rate of change (drastic uptick of flow or pressure).
Guest about 4 years ago in Info360 Insight 0 Under consideration

Adding a Water Calcs tool under the tools page

a tool with pre-built standard water calculations often used; maybe to interpolate C factors for a pipe based on recorded velocities, or average water loss on an asset based on flow meter 1 vs flow meter 2; or something hydraulic detention time ba...
Guest about 4 years ago in Info360 Insight 0 In progress

Updating a model in ICM Live is overly complicated and currently results in loss of data from previously ran simulations

The current process to update a model in ICM live is overly complicated and is currently not simple to grasp. This currently requires the removal of all runs from a particular manifest before you can remove and update the model being used. A simpl...
Guest about 4 years ago in InfoWorks ICM / Live Modeling 0 Gathering support

AASHTO Culvert inspection standard

https://store.transportation.org/Item/CollectionDetail?ID=213
Mike Maylone about 4 years ago in Info360 Asset / Inspections 1 Gathering support

Energy Toolsets

A tool to help in energy audits to help determine energy usage of a particular asset. Often data consumption is not always recorded, but other variables that can be used to inferr energy are (flow and pressure). We should be able to back calculate...
Guest about 2 years ago in Info360 Plant / Tools / Analytics 0 Under consideration

Innovyze Model results in Info360 Plant

Innovyze Model results in Info360 Plant - should be able to see my demand forecast or influent loading conditions for my treatment plants
Guest about 2 years ago in Info360 Plant / Integrations 0 In progress

API Connection to Weather/Temperature Data

Request came from Kansas City WaterOne. Utilities have noticed that weather events are often tied to pipe main breaks/leaks. If we could tie in temperature or weather data from a public source like NEXTRAD or NOAA, then utilities could see live up...
Tim Medearis about 4 years ago in Info360 Asset / Integrations 1 Under consideration

As a user of InfoWorks WS PRO, I would like to better simulate FMV valves

In InfoWorks WS PRO is possible to simulate FMV valves, but I would like to introduce a "deviation" option to better simulate it. I give an example: imagine a valve whose pressure setting is 2 Bar if flow is from 0 to 10 L/s, and 2.5 Bar if flow i...
Paolo Boiardi about 2 years ago in InfoWorks WS Pro / Engine 0 Gathering support