Autodesk
ADD A NEW IDEA

Clear

Productivity

    Showing 22 of 1372

    Add max pipe flow to the pipe properties window

    Max pipe flow (theoretical pipe full) is not listed in pipe properties, as it was previously in MicroDrainage. It was a useful feature.
    Ian George about 20 hours ago in InfoDrainage / Productivity 0 For Review

    Results screen disappears when minimised

    Minimising the results screen seems to cause the window to disappear and you cant maximise it again without rerunning the analysis
    Ian George about 21 hours ago in InfoDrainage / Productivity 0 For Review

    Improved catchment area import

    Importing the catchment areas from cad is an extremely useful feature which would save hours of time, however, it does not work with all the areas and specifically not those with curved lines (most of the time). I think if infodrainage could impor...
    Henry Wilkinson 3 months ago in InfoDrainage / Productivity 1 Under consideration

    Set gradient and/or pipe size of multiple parts within a single flow path in one operation.

    In some instances we need to change the gradient or pipe size of an entire flow path. It would be helpful if this could be done in one operation rather than each part individually. Any branch connections could also update to align unless locked.
    Guest about 1 year ago in InfoDrainage / Productivity 1 For Review

    Ability to look at multiple phases (surface and foul networks together) in 3D

    Being able to view both surface and foul networks within MicroDrainage was always a very useful feature to visualise crossing points in the network and it doesn't look to have been included in InfoDrainage.
    Henry Wilkinson 7 months ago in InfoDrainage / Productivity 1 For Review

    Save phase results seperately

    When working with multiple phases I would like to be able to run one phase (exclude all others from analysis) and have the results saved. Results should only be overwritten when a new run on the same phase is completed.
    Andrew Komarnycky 11 months ago in InfoDrainage / Productivity 0 For Review

    Pipe clash detection when foul network phase is active

    When working through clashes between surface water and foul networks, you can only access the pipe clash analysis within surface water analysis tab. This means if I want to change the depth of the foul network to avoid the clash then I have to swa...
    Henry Wilkinson 7 months ago in InfoDrainage / Productivity 1 For Review

    Graphical editing in Longsection

    Being able to manually drag pipes up/down and alter their gradient in the long section graphics, was an extremely efficient workflow in Microdrainage, especially when using min. pipe design levels to dictate land-raise FGLs. Can this function be c...
    Guest 9 months ago in InfoDrainage / Productivity 0 For Review

    Manhole Types

    Please allow us to specify manhole types (DMRB, SSG etc.) and covers and ensure that this data is visible in the manhole schedule export
    Guest almost 2 years ago in InfoDrainage / Productivity 1 Gathering support

    show upstream and downstream cover depth for connections

    MicroDrainage used to show this its useful for checking cover to pipes are correct
    Matt Hare about 1 year ago in InfoDrainage / Productivity 0 For Review

    Disclaimer: The development, release, and timing of any features or functionality described or discussed for our products in this User Feedback Forum for Autodesk Water Products and Services remains at our sole discretion. This User Feedback Forum for Autodesk Water Products and Services is not a commitment, promise, or legal obligation to deliver any functionality, is intended solely to outline and gather feedback about our general product direction, and should not be relied on in making purchasing decisions.

    Privacy | Cookie preferences