All ideas

Showing 1339 of 1339

Model results as TVD connectors

We'd like to have model results as an input in the TVD connectors. An example is where we have observed flows that we would like to use at a tributary and then switch to catchment flows when the observations run out. We know this can be done using...

Richard Body almost 5 years ago in InfoWorks ICM / Calibration / Results / Sharing / Time Series DB 0 Gathering support

4 VOTE

Need more inlet options

SSA has numerous inlet manufacturers and jurisdictions, including Caltrans, FDOT, Neenah, etc. These would be beneficial to have in InfoDrainage, including East Jordan inlets. Additionally, have depth vs flow curve option would be helpful as well.

Guest about 1 year ago in InfoDrainage / Hydraulics 0 For Review

11 VOTE

True Ground Profile on Long Section Exports

It would be very useful if there was a way for the true ground profile to also be exported on long sections. Currently, when exporting long sections from microdrainage, the true ground levels are only shown at manhole locations and a straight line...

Guest almost 3 years ago in InfoDrainage 2 Already exists

16 VOTE

Management of Siltation module within ICM Live

As part of our ICM Live system we use the Siltation module. While this creates a dynamic siltation on each pipe, there isn't an easy way to manage it. Once a pipe is cleaned we need to stop the live model and potentially apply all the dynamic silt...

Jose Pereira about 4 years ago in InfoWorks ICM / Live Modeling / Water Quality 0 Gathering support

2 VOTE

Allow changing displayed simple junction size

In plan view we are able to change the sizes of icons, labels, proper manholes and many other parts of our pipe networks, but the symbology for simple junctions is fixed in size (at about 1.2m?) and cannot be changed, which makes modelling, for ex...

Guest 6 months ago in InfoDrainage / Productivity 0 For Review

6 VOTE

Add button for show/hide inactive elements.

I frequently turn the inactive elements on & off in InfoWater Pro. Right now, this requires multiple mouse clicks & is inefficient. A button added to the ribbon and/or Model Explorer would be ideal.

Guest over 1 year ago in InfoWater Pro / Productivity 0 Gathering support

5 VOTE

Update RTC to Allow User to Create Folders

It would be very useful to have folders as an option in RTC Editor - this would allow users to group assets based on similar characteristics e.g. type, location, purpose. It would also be useful to be able to change the order of regulators in the ...

David Beesley over 1 year ago in InfoWorks ICM / Other 0 Gathering support

3 VOTE

Add ability to create custom channel as underdrain (not just pipe)

Currently, you can only chose a pipe or multiple pipes as the underdrain within various features (infiltration trench, dry swale etc.). It would be great if a custom channel (section) could be used so an infiltration trench could be used to model ...

Oliver Dodd 10 months ago in InfoDrainage / Hydraulics 0 For Review

15 VOTE

Add a result grid window for cross sections

Currently there is not a grid results window to show all cross sections. Would be helpful to have one. Also would be good if the grid window can show geometric elements of each cross section, such as bank levels, flow area, wetted perimeter, hydra...

Guest almost 4 years ago in InfoWorks ICM / Grids / Results 0 Gathering support

4 VOTE

3D View of flooded manholes

The extent of flooding in the 3D view should be proportional to the volume of flooding of that manhole. At the moment it shows the same extent of flooding whether it's 0.1m3 or 100m3. Would make visualisation the extent and location of flooding on...

Guest about 1 year ago in InfoDrainage / Visualization 1 Already exists

Please enter your email address

FILTER BY CATEGORY