All ideas

Showing 1369 of 1369

Orifice to limit flow in both directions

A limiting discharge set on an orifice should limit flow in both directions. Currently, the orifice limits flow in the forward direction; however, flow can go in the reverse direction at an unlimited rate. Hydraulically, if there is a physical fea...

Guest about 6 years ago in InfoWorks ICM / Hydraulics / Orifice 0 Gathering support

10 VOTE

Long-sections: Centre Geoplan on the selected link

It would be handy if the Geoplan centred on the selected link when selecting a long section. It seems every time select a long-section the windows split into two halves, one for the geoplan, the other for the long-section. As a result the link I j...

Benjamin Mauck over 4 years ago in InfoWorks ICM / Long Section / Profile 0 Gathering support

4 VOTE

Group of Sensors in Analytics

Adding the ability to use group/multiple sensors within the functions (min, max, avg/trends, etc.) of the analytics tool. Ex: Being able to use the highest function on a group of pressure sensors to generate the highest pressure value in the group

Hunter Sparks almost 2 years ago in Info360 Insight / Tools / Analytics 1 Under consideration

6 VOTE

Update French rainfall to include multiple durations

Ability to add more than 1 duration per return period in a single rainfall object. There are 3 sets of parameters for durations 6 < t < 60, 60 < t < 360 and 360 < t < 24hr. It would be useful to be able to add these parameter...

Guest almost 3 years ago in InfoWorks ICM / Rainfall 1 Gathering support

6 VOTE

Sediment depth variable for Storage nodes

It appears that amounts of sediment are carried along when water is overflowing over the banks of the river: part of the sediment from sediment fractions SF1 and SF2 leaves the river and goes to the Storage Areas during flooding. Although this is ...

Edith Maroy almost 3 years ago in InfoWorks ICM / Sediment / Simulations 0 Gathering support

3 VOTE

Move the Refresh Output checkbox

Refresh Output should be checked 99.9% of the time, if you accidentally uncheck it then you might unknowingly look at old results Map Displays do not update. Can this checkbox be moved to somewhere not in the Model Explorer so it is less likely to...

Grant Clemens over 1 year ago in InfoWater Pro / Productivity 0 Gathering support

6 VOTE

Order ARR19 Box and Whisker plots by duration

The box and whisker plot outputs order alphabetically. It would be useful if it ordered based on rainfall event duration instead.

Guest almost 3 years ago in InfoWorks ICM / Reporting / Results 0 Gathering support

12 VOTE

Infoworks - Pipe grade calculator

Pipe grade calculator between US and DS inverts, Ultimately having the ability to calculate downstream or upstream inverts over a long network based on a specified grade from either a DS or US invert level as a starting point.

Guest over 5 years ago in InfoWorks ICM / Hydraulics 1 Gathering support

12 VOTE

Removing missing GIS-layers

If a GIS-layer for a model is missing you cannot remove the reference to it because the layer isn't visible in the GIS layer control window. So you keep getting the error message each time you open the model. Why not make missing GIS-layers visibl...

Richard de Koning over 5 years ago in InfoWorks ICM / GIS Layers / Visualization 3 Under consideration

5 VOTE

Integration with Maximo

Work order data for risk, rehab, or deterioration modeling

Martha Nunez over 2 years ago in Info360 Asset / Other 4 Gathering support

Please enter your email address

FILTER BY CATEGORY