Autodesk
ADD A NEW IDEA

All ideas

    Showing 1425 of 1425

    Remove the 'Admin' page for Viewer and Field Inspector users.

    This is to prevent these users from accidentally editing this information without the Admin/Full access permission.
    Martha Nunez about 2 years ago in Info360 Asset 3 Already exists

    InfoWater Pro Valve Criticality Results in Info360 Asset

    Details to be provided. In meantime see: https://youtu.be/ei1HKhbWCLo?si=rZoH4x8eqOb4GW_s
    Tony Andrews about 2 years ago in Info360 Asset 0 Under consideration

    Add differentiator between Plant/Asset/Insight on top left corner

    I think it would be helpful to add the word Plant, Asset or Insight next to the Info360 Logo on the upper left corner. Please see image below for reference.
    Salvador Bentolila about 3 years ago in Info360 Asset / General 1 Gathering support

    Temperature variation for the PSO bulk chlorine decay model in the MSQ module of InfoWorks

    The reactive-constituent (PSO) chlorine decay model (Fisher et al. 2017) was provided to users in the MSQ module of InfoWorks in July 2020 (see the MSQ blog for details). A major advantage of this model is that only a single set of four model coef...
    Guest over 4 years ago in InfoWorks WS Pro / Engine 1 Gathering support

    Add calibration criteria

    Add in ability to review calibration in the model using calibration criteria such as those contained in the CIWEM COP
    Guest about 3 years ago in InfoWorks ICM / Calibration 0 Gathering support

    Basemap support

    The current x64 version of WS Pro doesn't seem to be able to use the ArcEngine / ArcGIS Desktop functionality, in contrast to previous x32 bit versions? Since only x64 bit version is now supported, this feature cannot be used. It is one of the mos...
    Guest about 2 years ago in InfoWorks WS Pro / Other 2 In progress

    Open Control Center on Selection, Selection Set, or Domain

    For models with lots of controls, this would be helpful to quickly look a few at a time. For example, all the controls at a specific site. Right now, the list appears to be sorted randomly. It would also be helpful to automatically sort alphabetic...
    Colin Ricks about 1 year ago in InfoWater Pro / Productivity 0 Under consideration

    Implement the Inflow Time Series Scaling Factor in InfoWorks from ICM SWMM

    Scale Factor In ICM SWMM or SWMM5 a multiplier is used to adjust the values of the constituent's inflow time series. The scale factor can have several uses, such as allowing one to easily change the magnitude of an inflow hydrograph while keeping ...
    Robert Dickinson about 2 years ago in InfoWorks ICM / Flow 0 Gathering support

    Improve Theme Symbol Support

    While setting up a custom theme to align WS Pro more closely to our GIS, I've found the support for symbols quite limited, and think these would be worthwhile improvements: Support the use of custom SVG icons, and/or Support the use of non-system...
    Dave Watts about 1 year ago in InfoWorks WS Pro / Other 0 Gathering support

    ICM sims updated with better control on sims outcome

    I think waiting a big time for a sim to be done and then because the sim results disk gets full, loosing all of the simulated data is something that should be prevented from the time someone sends the simulation. A warning should be issued when yo...
    Ionut Pintea over 5 years ago in InfoWorks ICM / Simulations 0 Gathering support

    Disclaimer: The development, release, and timing of any features or functionality described or discussed for our products in this User Feedback Forum for Autodesk Water Products and Services remains at our sole discretion. This User Feedback Forum for Autodesk Water Products and Services is not a commitment, promise, or legal obligation to deliver any functionality, is intended solely to outline and gather feedback about our general product direction, and should not be relied on in making purchasing decisions.

    Privacy | Cookie preferences