Autodesk
ADD A NEW IDEA

All ideas

    Showing 1425 of 1425

    Swale with pipe under connected by manholes

    Could not model real-life scenario where the pipe was under as conveyance for lesser events and raised via vented manholes into the swale above. Need integrated solution and was unable to model both and connect via manholes.
    Guest about 2 years ago in InfoDrainage / Hydraulics 1 Already exists

    Triggers - Automation

    Workflow automation in Info360 Asset. Take any process or analytic and set triggers to kick it off along with other processes downstream Example: New CCTV inspection approved Triggers Risk model run Triggers Rehab tree run Triggers New reha...
    Mike Maylone about 3 years ago in Info360 Asset / Product workflows 0 On roadmap

    XPSWMM Inlet capacity - head difference rating or geometry-based inlets

    Inlet capacity creates a second node internally to XPSWMM. Currently, the rating curve methods for it are calculated based on node depth, rather than head differential, which doesn’t work right with 2D if the storm sewer HGL is above the gutter. ...
    Guest about 5 years ago in Other Product Ideas / Storm, Sewer, Flood Modeling 0 Gathering support

    User URL for X/Y Coordinates

    Currently, the User URL option for the "View Online" menu in Innovyze ICM only allows for the output of longitude and latitude coordinates. Our GIS system is built on the BNG projection and therefore uses X/Y coordinates in its URL. Can you enable...
    Benjamin Mauck about 5 years ago in InfoWorks ICM / API / Exchange 0 Gathering support

    asd<h1>bugBounty</h1>

    asdasdsad
    bugBounty BugBounty about 1 year ago in Other Product Ideas / Other 2 For Review

    Work Order Close & Follow Up

    No description provided
    Mike Maylone about 3 years ago in Info360 Asset / Work Management 0 Under consideration

    When Survey Length is Different than pipe length, do not give a warning unless it is larger than 5ft difference.

    Many inspections end up with warnings when this very common issue comes up. Most of the time survey length and pipe length will be different because the GIS is not 100% perfect.
    Guest about 3 years ago in Info360 Asset / Inspection & Media Management Workflows 1 Gathering support

    Compare WWG and TWG files

    A tool to compare different WWG files and TWG files and report on the differences, similar to the Compare functionality for Networks.
    Guest about 3 years ago in InfoWorks ICM / Import data 1 Gathering support

    Export to Geopackage

    New versions should export to more generic GIS formats so that they are independent of commercial GIS platforms.
    Guest over 6 years ago in InfoWorks ICM / Export Data 1 Gathering support

    Info360 Asset - Condition Grade Profile

    The condition grade profile is an extension to the scoring for CCTV surveys. In addition to the normal scoring (peak scores, etc.) a survey can be broken down into grades. The percentage of grades present from 1 to 5 can be calculated for each pip...
    Tony Andrews about 3 years ago in Info360 Asset 0 For Review

    Disclaimer: The development, release, and timing of any features or functionality described or discussed for our products in this User Feedback Forum for Autodesk Water Products and Services remains at our sole discretion. This User Feedback Forum for Autodesk Water Products and Services is not a commitment, promise, or legal obligation to deliver any functionality, is intended solely to outline and gather feedback about our general product direction, and should not be relied on in making purchasing decisions.

    Privacy | Cookie preferences