Skip to Main Content
Autodesk
ADD A NEW IDEA

All ideas

Showing 726

Apply two-valve isolation for criticality analysis

For some projects we need to isolate the repair area with two closed valves in all directions in case one valve were to fail. Please incorporate this as an option in criticality analysis when summing affected customers
Nathan Gerdts about 2 years ago in InfoWater Pro / Other 0 Gathering support

Updating a model in ICM Live is overly complicated and currently results in loss of data from previously ran simulations

The current process to update a model in ICM live is overly complicated and is currently not simple to grasp. This currently requires the removal of all runs from a particular manifest before you can remove and update the model being used. A simpl...
Guest about 4 years ago in InfoWorks ICM / Live Modeling 0 Gathering support

AASHTO Culvert inspection standard

https://store.transportation.org/Item/CollectionDetail?ID=213
Mike Maylone about 4 years ago in Info360 Asset / Inspections 1 Gathering support

As a user of InfoWorks WS PRO, I would like to better simulate FMV valves

In InfoWorks WS PRO is possible to simulate FMV valves, but I would like to introduce a "deviation" option to better simulate it. I give an example: imagine a valve whose pressure setting is 2 Bar if flow is from 0 to 10 L/s, and 2.5 Bar if flow i...
Paolo Boiardi about 2 years ago in InfoWorks WS Pro / Engine 0 Gathering support

Change Variable Speed Pumps Image

The image for Variable Speed Pumps under the "Other Special Diversion Examples" section is likely wrong. Looks like it is a copy of the image for Pump discharge pipes. Would be great if you could update with the right image! Thanks
Guest over 4 years ago in InfoWorks ICM / Pumps 0 Gathering support

Warning Messages in InfoSewer

Is there a way to stop the program from checking for this? InfoWater has the Engineering Validation Manager which allows the “rules check” to be toggled on and off. The user does not want to see Negative Flow Warning messages in the RPT file of I...
ROBERT DICKENSON over 4 years ago in Other Product Ideas / Storm, Sewer, Flood Modeling 0 Gathering support

As a user, when transmit a model in XPSWMM, I would like the externally referenced surface, soil and landuse also be packaged.

In XPSWMM, when 2D data are referenced externally, they are not packaged when transmit the model
Guest over 4 years ago in Other Product Ideas / Storm, Sewer, Flood Modeling 0 Gathering support

Support polygon geometries in geoJSON imports

Support polygon geometries in geoJSON imports
Guest about 2 years ago in Info360 Asset / Asset / Spatial Data Import 1 Gathering support

As an XPSWMM user, I would like to be able to import flow data from SWMM5 Inflow/outflow formats. So that I can import results from CUHP.

For the latest versions of CUHP https://mhfd.org/resources/software/ , it is using the SWMM5 text inflow/outflows format for results. Therefore the old conversion tool in XPSWMM no longer works.
Guest over 4 years ago in Other Product Ideas / Storm, Sewer, Flood Modeling 0 Gathering support

Copy all the scenarios from a Model

Impossible to make a subsystem copy of a model (with different scenarios) that brings all the scenarios to the new model when I make a copy of the selected nodes and links. At this moment, a copy only brings the current scenario.
Juan Carlos Ortega about 2 years ago in InfoWorks WS Pro / Data Exchange 0 Gathering support