All ideas

Showing 1170 of 1170

Enable the ability to review Debug Logs from external text editor

The internal Log results editor window is slow when loading over 100K lines. Needless to say - debugging a model where the debug log is 11 GB cant be done in the product, and the workflow to export to file is simply excruciatingly painful. As the ...

Matt Anderson 12 months ago in InfoWorks ICM / Productivity 1 Gathering support

5 VOTE

Baseline Replacement Cost Tool

IAP has a very simple baseline replacement cost tool. It has been requested to be in Info360 Asset. Could be rolled into the deterioration modeling tool. https://help.innovyze.com/space/infoassetplanner/15794424/Baseline+Replacement+Cost

Tim Medearis 12 months ago in Info360 Asset / Rehabilitation Planning 1 Under consideration

5 VOTE

Stub out CCTV Lateral Defects

In InfoAsset Planner, the CCTV data for laterals was stubbed out and drawn into the GIS as a polyline. In Info360 Asset, these 'defects' are still visualized only as a point on the pipe, as an 'X'. Seeing the laterals is extremely valuable and 'pa...

Tim Medearis 12 months ago in Info360 Asset / Map visualization 0 Gathering support

11 VOTE

True Ground Profile on Long Section Exports

It would be very useful if there was a way for the true ground profile to also be exported on long sections. Currently, when exporting long sections from microdrainage, the true ground levels are only shown at manhole locations and a straight line...

Guest about 2 years ago in InfoDrainage 2 Already exists

19 VOTE

I would like to be-able to reorder scenarios in the drop down in ICM

II would like to be able to change order of scenarios (after Base). So be able to move up scenarios or down scenarios in the drop down list. I often have to delete scenarios or created amended versions of copied scenarios and this often results in...

Guest over 3 years ago in InfoWorks ICM / Scenario 2 Gathering support

2 VOTE

Initial condition 1D setting value

For Initial Conditions 1D, InfoWorks ICM seems to specify 1) initial level(m AD) and inflow values at nodes for Nodes grid, 2) and initial depth (m) and flow values along the river reach for River Reaches grid. For river reaches grid, as an initia...

Guest 5 months ago in InfoWorks ICM / InfoWorks 0 For Review

4 VOTE

Ability to label spatial layers in the map

Layer labels such as customer ID, Basin ID, management area, etc are useful to have in the map so that users can easily locate their customers and areas that they need to serve when conducting and assigning field work.

Martha Nunez 10 months ago in Info360 Asset / Map visualization 3 Gathering support

9 VOTE

Use PDM Soil moisture deficit variable to trigger RTC

Just like you can set thresholds or target values for level or flow in an RC I would like to be able to use the Soil moisture deficit variable from PDM subcatchment to regulate structures or variable pumps. This could be useful to somewhat reprodu...

Guest almost 2 years ago in InfoWorks ICM / Hydrology 0 Gathering support

4 VOTE

Add the ability to drain subcatchments to the grate of a gully

When importing models from XPSWMM to ICM, my subcatchments drain directly to the node where an inlet capture curve is applied to limit flow to the 1d system. I would like to replicate this behavior easily in ICM when nodes are connected to the 2D ...

Sophia Buchanan 10 months ago in InfoWorks ICM / Inlets 0 Gathering support

5 VOTE

GPU for 2D Erosion Deposition Model

The 2D erosion-deposition model can only be simulated on the CPU. For 2D rain-on-mesh models with GPU simulation times spanning hours, it becomes impractical to integrate the 2D erosion-deposition model, as CPU simulation times would extend into d...

Daniel Fensom 12 months ago in InfoWorks ICM / Water Quality 0 Gathering support

Please enter your email address

FILTER BY CATEGORY