Autodesk
ADD A NEW IDEA

All ideas

    Add Snowmelt to InfoDrainage

    The addition of SWMM5 snowmelt will make it easier to model LID's in North America which has a lot of snowfall in Canada and the northern USA. Snowmelt can be a significant source of water annually to a LID or SuDS.
    ROBERT DICKENSON about 3 years ago in InfoDrainage / Hydrology 1 Under consideration

    Add the ability to drain subcatchments to the grate of a gully

    When importing models from XPSWMM to ICM, my subcatchments drain directly to the node where an inlet capture curve is applied to limit flow to the 1d system. I would like to replicate this behavior easily in ICM when nodes are connected to the 2D ...
    Sophia Buchanan over 2 years ago in InfoWorks ICM / Inlets 0 Gathering support

    Visualizer for "Multiple" Outlet Control Design

    When designing a "multiple" outlet control for stormwater structures (such as a perforated riser), it would be helpful to have a visual schematic to ensure that the design intent is being captured. Multiple competitor tools (HydroCAD, Hydrology st...
    Midori Patterson over 2 years ago in InfoDrainage / Visualization 1 Gathering support

    Option to compare Simulations of different time ranges superimposed on one graph [IWLive]

    As an operator, I want to compare today's forecasted operations with different days in the past so I can see alternative ways how similar situations played out and make decisions with confidence. IWLive already offers functionality to compare two ...
    Nathan Gerdts over 1 year ago in InfoWorks WS Pro / Operations 0 For Review

    Group of Sensors in Analytics

    Adding the ability to use group/multiple sensors within the functions (min, max, avg/trends, etc.) of the analytics tool. Ex: Being able to use the highest function on a group of pressure sensors to generate the highest pressure value in the group
    Hunter Sparks over 2 years ago in Info360 Insight / Tools / Analytics 1 Under consideration

    Realistic Flow in SuDS structures

    Realistic flow through bioretention, permeable paving and other SuDS within hydraulic models.
    Guest almost 4 years ago in InfoDrainage 0 Gathering support

    Exceedance Level in Infodrainage

    It would be good to have an option in underground stormwater controls to have a separate option for exceedance level and Ground Level By taking the exceedance level as GL, it makes the Long sections look distorted when in reality it is common for...
    Guest almost 4 years ago in InfoDrainage 1 Already exists

    InfoDrainage - Permeable Paving

    It would be useful to have a central granular conveyance trench beneath permeable paving to avoid the need for overly deep sub base beneath the road / drive.
    Guest almost 4 years ago in InfoDrainage 1 Already exists

    InfoDrainage - Split subcatchments option for Laurenson runoff routing method

    It is industry best practice to split up the subcatchments in a model into their pervious and impervious areas when adopting the Laurenson (or RAFTS) runoff routing method ie U = 2 and U = 0. The current workflow to achieve this is to setup the mo...
    Guest almost 4 years ago in InfoDrainage 1 Under consideration

    make easier the result analysis

    make easier the result analysis, by editing the results (e.g volume in en pipe) at a given timestep (e.g. daily, hourly...)
    Christophe LECLERC 8 months ago in InfoWorks ICM / Statistics 0 For Review

    Disclaimer: The development, release, and timing of any features or functionality described or discussed for our products in this User Feedback Forum for Autodesk Water Products and Services remains at our sole discretion. This User Feedback Forum for Autodesk Water Products and Services is not a commitment, promise, or legal obligation to deliver any functionality, is intended solely to outline and gather feedback about our general product direction, and should not be relied on in making purchasing decisions.

    Privacy | Cookie preferences