All ideas

Showing 1383 of 1383

Would it be possible to include longitudinal gradient (slope) to attenuation tanks please? At the moment it appears that software assumes that these structures are constructed flat whereas in real life these could be constructed with a gradient (slope) from the upstream end towards the outlet.

At the moment it appears that software assumes that these structures are constructed flat whereas in real life these could be constructed with a gradient (slope) from the upstream end towards the outlet (and this could then change the head of wate...

arek kadlec almost 2 years ago in InfoDrainage / Hydraulics 1 Gathering support

8 VOTE

Freeboard in Results

When freeboard is exceeded from something like a basin, it is not immediately clear in the stormwater control results. It says flood risk and a water level that eats into the freeboard, but it does not flag up that this is an issue and is easily m...

Guest 8 months ago in InfoDrainage / Hydraulics 0 For Review

11 VOTE

possibility to connect labels to links at the beginning or end instead of only in the middle of the link

This way you can show that link invert levels on a manhole differ in value or deviate from the chamberfloor

Loes van der Linden 11 months ago in InfoWorks ICM / Labels 3 Already exists

4 VOTE

Query “System Demand” results for “totalized” volume

It is universally understood that “the area under the curve” approximates the total volume of water for each of the “System Demand” output graphs in InfoWater Pro. Although a “Totalizer” can be applied to a pipe, it is not currently possible to qu...

Michael Kane 4 months ago in InfoWater Pro / Productivity 1 Gathering support

7 VOTE

Repeat Table Headers on each page

The report tables currently display the table headers once under each return period / critical event. If the headers were repeated on each page, the tables would be easier to read. Thanks

Guest 7 months ago in InfoDrainage / Reporting 1 Gathering support

1 VOTE

Info Asset Online enable 3D video in defects tab of surveys

According to the latest standards for manhole inspection, our measurement data is provided in 3D. Unfortunately, there is no option to present it in this format in IAO.

Ewa Denys about 1 month ago in Other Product Ideas / Asset Management 0 For Review

15 VOTE

Set gradient and/or pipe size of multiple parts within a single flow path in one operation.

In some instances we need to change the gradient or pipe size of an entire flow path. It would be helpful if this could be done in one operation rather than each part individually. Any branch connections could also update to align unless locked.

Guest over 1 year ago in InfoDrainage / Productivity 2 Will not implement

49 VOTE

Improve ground infiltration simulation parameters.

Could we have a 'Node level affects groundwater infiltration' for the soil store please? This simulation parameter was introduced to InfoWorks ICM recently to limit infiltration from the ground store to the model. Could this be extended to limit f...

Tom Walker over 4 years ago in InfoWorks ICM / Calibration / Groundwater / Hydrology 0 Gathering support

14 VOTE

Add ability to see all pipes in Network Design Report

It is not possible to view the details / preliminary results of all the connections in the Network Design Report (each flow path needs to be selected in turn). This can be awkward for large networks.

Matthew Johnson over 1 year ago in InfoDrainage / Auditing / Reviewing 0 For Review

6 VOTE

Accept HKO NETCDF file format as STSD

The spatial time series data currently accept netcdf format of AUS.BOM and SJSU. HKO .nc formt is not supported . Please support HKO netcdf format.

HENRY LAM 7 months ago in InfoWorks ICM / Live Modeling 1 Will not implement

Please enter your email address

FILTER BY CATEGORY