Autodesk
ADD A NEW IDEA

Hydraulics

Showing 95

Slot Width field for 1D conduits

Could the Slot Width field be enabled for Conduit Type "Conduit" and results generated by the application of the numerical correction tool been stored there for greater clarity, thanks.
Giorgio Incelli about 2 years ago in InfoWorks ICM / Hydraulics / Reporting 4 Gathering support

Wide "Oval" shape ID

conduit shape ID "Oval" only allows Height > With. So for "horizontally" wide oval conduits a new conduit shape has te be defined. It would be practical if the standard "Oval" also allows a with greater than the hight.
Guest about 5 years ago in InfoWorks ICM / Hydraulics 0 Gathering support

Allow the user to choose the flood type of pond or storage nodes

Allow the user to choose the flood type of pond or storage nodes from a drop down as is the case for manholes. As opposed to the current state where the flood type depends on the relationship between the highest level entry in the storage array an...
Lizzie over 3 years ago in InfoWorks ICM / Hydraulics 0 Gathering support

Drain nodes connected to 2d domain representing road gullies to 1D pipe network without digitised connection

Often datasets of road gullies are only in point format and lack details on the connections to the surface water sewer network. A function to allow 1D nodes representing road gullies (which are are connected to the 2D domain with a head discharge ...
Guest 10 months ago in InfoWorks ICM / Inlets 0 Gathering support

Minimum mesh element area

As we are aware that "Minimum mesh area" will be used in calculating the results. However, presently there is no specific function that directly displays the min mesh element area generated and its associated element ID. Validation needs to be per...
Guest over 1 year ago in InfoWorks ICM / Hydraulics 0 Gathering support

RTC Debugging Interface and Support

It would be really useful to have a debugging module for the RTC components in InfoWorks ICM so that one can go step by step through a simulation to display in simulation RTC values-things like variable values (e.g. timers), range/logic values, ac...
Guest over 3 years ago in InfoWorks ICM / API / Exchange / RTC 1 Gathering support

snap river reach lines to cross sections

When creating river reach links the vertices should snap to cross sections so that vertices are only created on the cross-section lines (if vertices are to close on river reach objects you get meshing problems later on!) and is easier to follow th...
Guest over 1 year ago in InfoWorks ICM / River Modeling 0 Gathering support

River reach theming

It would be great if a river reach could be themed individually across the left and right banks and if theming were more flexible for storage areas too.
Guest about 5 years ago in InfoWorks ICM / River Modeling / Visualization 0 Gathering support

Lateral inflows from event data for rivers

Currently it is possible to add lateral inflows to a river via subcatchments, if we could also do this directly from event data or TSDB that would be great.
Guest about 5 years ago in InfoWorks ICM / Events / Flow / Hydraulics 0 Gathering support

Orifice to limit flow in both directions

A limiting discharge set on an orifice should limit flow in both directions. Currently, the orifice limits flow in the forward direction; however, flow can go in the reverse direction at an unlimited rate. Hydraulically, if there is a physical fea...
Guest over 5 years ago in InfoWorks ICM / Hydraulics / Orifice 0 Gathering support

Disclaimer: The development, release, and timing of any features or functionality described or discussed for our products in this User Feedback Forum for Autodesk Water Products and Services remains at our sole discretion. This User Feedback Forum for Autodesk Water Products and Services is not a commitment, promise, or legal obligation to deliver any functionality, is intended solely to outline and gather feedback about our general product direction, and should not be relied on in making purchasing decisions.

Privacy | Cookie preferences