All ideas

Structure flow mode reported in the results

Sometimes when evaluating results at structures we see strange results that require investigation; invariably we find out that this is because the flow mode has changed. (e.g. from free to drowned). It would be very helpful if the ICM results were...

Richard Body about 6 years ago in InfoWorks ICM / Grids / Reporting / Results 0 Gathering support

2 VOTE

Report manager should populate without running model

Currently, the report manager is only populated once results are shown. This makes it so that the only place I can view the model data before running, is the data base manager. You should be able to have the report manager populated without runnin...

Endrit Shabani over 2 years ago in InfoWater Pro / Other 0 Gathering support

3 VOTE

Add differentiator between Plant/Asset/Insight on top left corner

I think it would be helpful to add the word Plant, Asset or Insight next to the Info360 Logo on the upper left corner. Please see image below for reference.

Salvador Bentolila over 3 years ago in Info360 Asset / General 1 Gathering support

3 VOTE

Add calibration criteria

Add in ability to review calibration in the model using calibration criteria such as those contained in the CIWEM COP

Guest over 3 years ago in InfoWorks ICM / Calibration 0 Gathering support

2 VOTE

Infiltration Trench using BRE DIGEST 365 method

The software needs to support for designing Infiltration trench method by using “BRE DIGEST 365”. I have checked the comparison between Infodrainage analysis Vs BRE digest 365 (manual calculation) and the results are not matching. Most of the proj...

Guest over 2 years ago in InfoDrainage / Hydraulics 8 Gathering support

2 VOTE

Infiltration surface in InfoWorks ICM

Within a part/selection of conduits, I want to know what the (infiltration) surface area is below a certain level (m AD). For example, what is the surface area of the ditch (bottom and sidewalls) up to a level of e.g., 4.0 or 5.0 m AD. Using Model...

Guest over 2 years ago in InfoWorks ICM / Other 0 Gathering support

2 VOTE

Enable resolution setting when view is stored in clipboard or files

When simulation results are summarized and reported, network data is printed after nicely arranged. In ICM, there is no way to define the resolution of views and it can deteriorate the printed views when they are output in large papers. Could you ...

Miyuki Okuda over 2 years ago in InfoWorks ICM / Printing 0 Gathering support

5 VOTE

Automatically add network details when copying a network from commit history

When a version of a network is copied via the commit history dialog box, the standard commit detail generated is "created from copy". Could this be extended by automatically inserting the original network name and version number ? It would help a ...

Guest about 6 years ago in InfoWorks ICM / Network / Productivity 0 Gathering support

3 VOTE

Integration - Inspections (Granite, IT Pipes, Wincan)

Stream inspection videos from Granite, IT Pipes, Wincan. Import inspection records and code defects.

Mike Maylone over 3 years ago in Info360 Asset / Other 0 In progress

2 VOTE

Swale with pipe under connected by manholes

Could not model real-life scenario where the pipe was under as conveyance for lesser events and raised via vented manholes into the swale above. Need integrated solution and was unable to model both and connect via manholes.

Guest over 2 years ago in InfoDrainage / Hydraulics 1 Already exists

Please enter your email address

FILTER BY CATEGORY