Ideas

Showing 288 of 1373

Sewer Design - Locking gradients

It would be useful if you could lock sewer gradients or manhole relationships so that if you changed an upstream level it would automatically amend downstream levels

Guest about 3 years ago in InfoDrainage 1 Gathering support

1 VOTE

Apply direct inflows to permeable paving

There should be a way of applying the inflow that the paving receives directly (i.e. the rain that falls onto it) to produce a more accurate simulation of the rainfall. This direct rainfall isn't a lateral or point inflow, and being forced to mode...

Craig Bobbett 10 months ago in InfoDrainage / Hydraulics 0 For Review

2 VOTE

Exclude specific elements from Numbering Scheme (flow paths, manholes, simple junctions, etc).

Be able to have only manholes in the manhole schedule, without any missing manhole numbers. Junctions can be named separately and not included. Enable large sites with multiple areas to have their different areas named a different way easier.

Guest over 1 year ago in InfoDrainage / Auditing / Reviewing 2 Gathering support

3 VOTE

Update downstream pipes

It would be useful to have an option to upsize downstream pipes automatically (just like microdrainage). For example, if i increase pipe size the corresponding downstream pipes should upsize accordingly so not to cause a restriction. At the minute...

Guest over 2 years ago in InfoDrainage / Productivity 2 Already exists

1 VOTE

Allow underdrains to be displayed in the connection tables and add pipe number to them

It is very difficult to create a quick and logical pipe schedule when pipes such as underdrains are hidden in the SuDS nodes and their upstream invert level needs to be calculated manually. Please add the underdrains to the connection tables with ...

Iwona Savas 11 months ago in InfoDrainage 0 For Review

2 VOTE

Infiltration Trench using BRE DIGEST 365 method

The software needs to support for designing Infiltration trench method by using “BRE DIGEST 365”. I have checked the comparison between Infodrainage analysis Vs BRE digest 365 (manual calculation) and the results are not matching. Most of the proj...

Guest almost 2 years ago in InfoDrainage / Hydraulics 8 Gathering support

2 VOTE

Swale with pipe under connected by manholes

Could not model real-life scenario where the pipe was under as conveyance for lesser events and raised via vented manholes into the swale above. Need integrated solution and was unable to model both and connect via manholes.

Guest almost 2 years ago in InfoDrainage / Hydraulics 1 Already exists

6 VOTE

Auto populate an incremental ID for objects such as lines/polygons/subcatchments etc.

Often source data is provided with a non unique ID. Nodes auto generate an ID, and conduits will create a node, but the remaining asset classes struggle somewhat and often you need to manipulate the GIS data. I would like to be able to have ICM...

Ann Pugh over 5 years ago in InfoWorks ICM / Data Exchange / GIS Layers / Import data 0 Gathering support

5 VOTE

ICM Status bar to show more significant figures

The status bar currently only displays levels (ground model level, water depth) to 1 decimal place. 2 Decimal places would be much more useful, Especially to ensure a node is at a low point or in the gutter invert..

Gregory Smith almost 5 years ago in InfoWorks ICM / Productivity / Visualization 1 Gathering support

2 VOTE

Make Grips Visibile

Lets get Grips, and make them visible! Autodesk is damn good at this. ICM is not.

Guest about 2 years ago in InfoWorks ICM / Visualization 0 Gathering support

Please enter your email address

FILTER BY CATEGORY