Ideas

Showing 150 of 1442

Add check dams as a feature for swales

Add a check dam setting with height, notch weir and interval settings to simplify modelling swales on sloping sites. This avoids having to model several sections of swale in order to use the available storage.

Oliver Dodd over 1 year ago in InfoDrainage / Hydraulics 0 For Review

5 VOTE

Progress bar to show status of results being downloaded from the cloud

By default, ICM Cloud simulations store results in the cloud. When downloading results to a local results folder, the 'Status' in the 'Job Control' window only displays 'Downloading results' without providing details such as the amount of data dow...

Rahul Raj 4 months ago in InfoWorks ICM / Results 2 Under consideration

23 VOTE

Horizontal orifices as an outlet type

HydroCAD offers a horizontal orifice control outlet type that is very commonly used for detention pond outlet types in the US. Please include this as an outlet type so we can transition from HydroCAD to InfoDrainage.

Midori Patterson almost 2 years ago in InfoDrainage / Hydraulics 1 Gathering support

23 VOTE

Would it be possible to include longitudinal gradient (slope) to attenuation tanks please? At the moment it appears that software assumes that these structures are constructed flat whereas in real life these could be constructed with a gradient (slope) from the upstream end towards the outlet.

At the moment it appears that software assumes that these structures are constructed flat whereas in real life these could be constructed with a gradient (slope) from the upstream end towards the outlet (and this could then change the head of wate...

arek kadlec about 2 years ago in InfoDrainage / Hydraulics 1 Gathering support

9 VOTE

Freeboard in Results

When freeboard is exceeded from something like a basin, it is not immediately clear in the stormwater control results. It says flood risk and a water level that eats into the freeboard, but it does not flag up that this is an issue and is easily m...

Guest 10 months ago in InfoDrainage / Hydraulics 0 For Review

13 VOTE

Expand gauged object results to all result fields

Currently the gauged object result fields are limited. For instance, they do not include 2d related results at nodes. As the use case for ICM has expanded so has the information that users are interested in. No longer as they just looked at 'flow ...

Alex Grist over 1 year ago in InfoWorks ICM / Results 3 Under consideration

13 VOTE

Changes to a network do not propagate downstream

If you change a pipe diameter or gradient, it will not accommodate these changes in the downstream section of the network. For example upsizing and steepening a pipe in the middle of a run will mean the next pipeis undersized and goes uphill. It a...

Matthew Johnson over 1 year ago in InfoDrainage / Hydraulics 1 For Review

2 VOTE

Option to remove the 1m access chamber from cellular storage design

For a start, its not clear that the software actually does this, except one line in the help. So would probably be a good idea to make that clear. But the main issue is that I either need to mess with the volume or the porosity to make the volume ...

Guest 3 months ago in InfoDrainage / Hydrology 0 For Review

26 VOTE

Create channel section lines from points

Survey data for river sections is often delivered as point data. To be able to create a model in ICM from this it needs to be converted into a line. This functionality was available in RS.

Guest about 3 years ago in InfoWorks ICM / Productivity / River Modeling 0 Gathering support

8 VOTE

Slope in %

It would be very handy if the slope input option of % be present regardless of Regional settings; being just 1:x is an important limitation; also, if the slope in % could be shown in the section views, would be nice.

Guest about 1 year ago in InfoDrainage / Hydraulics 0 For Review

Please enter your email address

FILTER BY CATEGORY