InfoDrainage

Showing 23

Velocity Result for Swale Stormwater Control Feature

The velocity parameter in a swale is an important consideration with respect to determining erosion possibility, potential swale lining requirements and help inform check-dam design & locations. As it stands you cannot get the velocity result ...

Shane Moynihan 10 months ago in InfoDrainage / Hydraulics 2 Launched

12 VOTE

Restore the function to export formatted results to Excel (not just raw CSV data)

In 2024, we were able to print results to a formatted Excel file. As of 2026, we can only export raw csv data to Excel.

Daniel'le DeVoss 3 months ago in InfoDrainage / Reporting 3 Launched

42 VOTE

Auto-Profile Feature in InfoDrainage

We are asking for a Gravity Auto Profile feature in the InfoDrainage with integration with other services as sanitary, water and electrical …etc. This feature would automate the creation of longitudinal profiles for gravity-fed drainage systems (M...

Mohamad Azzam over 1 year ago in InfoDrainage / Hydraulics 4 Launched

10 VOTE

Reporting of velocity through swales

If you design swales using Stormwater Controls (Swale) you will not be able to see simulated velocities through the swale. I believe you could try modelling as an open channel connection but you won't get infiltration through the sides & base.

Matthew Johnson 10 months ago in InfoDrainage / Hydraulics 1 Launched

19 VOTE

Composite Runoff Coefficients

Allow the input of different surfaces with appropriate runoff coefficients for each subcatchment. For example, paved 100%, tarmac roades 90/95%, gravel 30/50%, soft 10%. This would provide a better audit trail for the net contributing areas input ...

Guest about 2 years ago in InfoDrainage 5 Launched

22 VOTE

Clash detection between pipe networks

Can wall thicknesses be added to pipes and manholes to check clash detection

Guest almost 3 years ago in InfoDrainage 4 Launched

8 VOTE

Filtering of simulation results

Similar to the coloured flag controls available in MicroDrainage, can a filter be added to allow simulation results to filtered down to surcharge, flood risk or flood manholes? It doesn't look like the tables function can be used for this.

Michael McWhinnie over 1 year ago in InfoDrainage / Reporting 3 Launched

8 VOTE

Pipe Capacity and Flow results

in MicroDrainage, when designing a pipe network there was a table below the main design table giving results, with Pipe flow and pipe capacity, (amongst others) this was useful to identify where to increase pipe diameters if nearing the capacity o...

Steven Gilchrist about 2 years ago in InfoDrainage / Productivity 2 Launched

10 VOTE

Formatting of Reports

The output reports from Infordrainage, are not set to fit the page and as such, there is a lot of "white space" left on the outputs. At present, there are no formatting options to change this. It makes the drainage report look a bit untidy.

Guest almost 3 years ago in InfoDrainage 3 Launched

9 VOTE

InfoDrainage - Re-Ordering Tables

Please can you add an ability to manually adjust the order of Junctions and Connections as the tables quickly become difficult to follow. The automatic re-ordering seems to reset as soon as you make any changes!

Guest almost 3 years ago in InfoDrainage 2 Launched

Please enter your email address

FILTER BY CATEGORY