Ideas

Showing 11 of 1370

VSP Control based on Tank Head/Level

Currently you can only use Junction Pressure setpoints or Pump Flow setpoints in the VSP Control dialogue. It would be helpful to be able to use a Tank Level/Head setpoint to adjust the pump speed as well. This is possible in competitor products l...

Grant Clemens over 2 years ago in InfoWater Pro / Operational Modeling 3 Under consideration

5 VOTE

Totalizer Valve and Controls

It would be very useful to have a totalizer valve which closes after a certain amount of flow passes through over a given time, such as 5 MGD over a day, then reopens once that time period has passed. Alternatively, a control option based on a pip...

Guest 12 months ago in InfoWater Pro / Operational Modeling 1 Under consideration

3 VOTE

Pressure Relief Valve

Which valve, if any, would represent a pressure relief valve? Where the pressure on the upstream is not allowed to exceed a certain psi. If it exceeds the specified pressure on the upstream side the valve will open.

Guest 11 months ago in InfoWater Pro / Operational Modeling 2 For Review

3 VOTE

Distribution Network Energy Optimization

Minimize the pumping costs of water distribution while satisfying water demand and operational constraints (water levels, pressure, pump station capacities, future maintenance operations, etc).

Nathan Gerdts over 1 year ago in InfoWater Pro / Operational Modeling 0 Gathering support

9 VOTE

Group InfoWater Pro pumps into a pump station object that aggregates results

As a modeler I want to summarize the behavior of a pump station of multiple pumps using a polygon. This helps me summarize energy usage and total flow without needing to select arbirary upstream or downstream objects. This also helps simplify syst...

Guest about 4 years ago in InfoWater Pro / Operational Modeling 1 Gathering support

2 VOTE

Add "Cloud" Run Mode for InfoWater Pro Surge simulations

IWP Surge has the unique ability to run surge simulations without the need to skeletonize the model. However, the Standard mode is currently the only option for running Surge simulations (Background and Cloud are not available). On larger models a...

Michael Kane 12 months ago in InfoWater Pro / Cloud Simulations 0 For Review

12 VOTE

Initial Tank Levels

It would be great to be able to change the initial tank levels without having to create a whole new tank data set or putting a duplicate tank in the current data set. That way, the initial tank level condition can be changed for any given scenario...

Guest about 6 years ago in InfoWater Pro / Operational Modeling 4 Will not implement

2 VOTE

Provide option to allow for several multipliers and use with selection sets

In addition to a global multiplier, sometimes you want to peak certain areas and selection sets with specific peaking factors. WaterCAD allows for this under their calculation options.

Michele Marston over 1 year ago in InfoWater Pro / Operational Modeling 0 Gathering support

2 VOTE

Adjust VSP "Control Value" during model run with Basic Controls

Seems like a fundamental control to be able to adjust a pump's target flow rate dynamically, for a high/low flow setpoint based on tank levels or other triggers. I can currently adjust the speed setting in basic rules, but trying to hit a target f...

Eric King over 2 years ago in InfoWater Pro / Operational Modeling 2 Gathering support

1 VOTE

Isolation Scenario Using Dummy Valves Which Do Not Split Pipes

Can you put a valve on top of a pipe (not splitting the pipe) and then it closes the section? And then anything enclosed to these multiple valves will be isolated? This is going to be useful for modelling of isolation scenarios

Guest almost 2 years ago in InfoWater Pro / Operational Modeling 3 Gathering support

Please enter your email address

FILTER BY CATEGORY