All ideas

Showing 157

Scenarios in IWLive

Currently, it appears that scenarios set up in InfoWorks Pro cannot be viewed within IWLive. This is a significant drawback, as scenarios such as peak demand conditions are often used and need to be interrogated within IWLive. I think adding in th...

elizabeth Richardson 8 days ago in InfoWorks WS Pro / Engine 0 Under consideration

16 VOTE

ICM-IAM-WSPro Save grid layout as a database object

Users can set up different configurations of their data grids depending on the work they are doing. They can then save the grid layouts as default for a particular network, or default for the type of network, and export to an iws file. This is par...

Tony Andrews 29 days ago in InfoWorks ICM / Grids 2 Under consideration

3 VOTE

Allow more data points and specific flow intervals in the System Curve run

The System Curve simulation is currently limited to 51 data points (PSA tool limited to 100), which is arbitrarily low for modern hardware capabilities. It would be nice to allow for more data points and/or to be able to set a specific flow interv...

Grant Clemens 10 days ago in InfoWater Pro / Productivity 0 Under consideration

28 VOTE

FEH22 Rainfall via the Exchange

Given the current workload involved in generating FEH22 rainfall data, it would be highly beneficial if this functionality could be made available through the InfoWorks ICM Exchange. This would streamline workflows and significantly reduce manual ...

Sebastian Madrid 4 months ago in InfoWorks ICM / Rainfall 3 Under consideration

2 VOTE

Ability to add comments within the Decision Tree

Provide the ability to add user comments at individual decision points within the decision tree to document rationale and assumptions.

Candice Valerio 22 days ago in Info360 Asset / Decision Tree Canvas 1 Under consideration

56 VOTE

Adding Babbit Formula

Requesting addition of Babbit formula peak factor calculation to Infodrainage program, providing comprehensive analysis for efficient and accurate design and decision-making since Babbit formula peak factor calculation method used in many standard...

Mohamad Azzam almost 2 years ago in InfoDrainage / Hydraulics 2 Under consideration

55 VOTE

Canadian Rainfall Data - Built-in Design Storms

Environment Canada has regional rainfall data that should be available automatically in InfoDrainage similar to the NOAA Design Storms currently available in the Rainfall/Pollutants Tab of the software. This is a pain point for Canadian users, as ...

Guest about 2 years ago in InfoDrainage / Rainfall 1 Under consideration

31 VOTE

Process statistical reports from Ruby and ICM Exchange.

As part of DWMP running TSR "en masse" may be a requirement.We would like to code these in and export the statistical report results onc ethey are complete.This would save a great deal of time and would be processed in the background.There will be...

Jose Pereira over 1 year ago in InfoWorks ICM / API / Exchange 1 Under consideration

40 VOTE

Infiltration trench with varying depth.

It should be possible to design an infiltration trench where the long slope at the base of the trench is different to the slope at exceedance level i.e. the depth of the trench varies. Extremely useful for designing a trench that does not match fa...

Guest over 1 year ago in InfoDrainage / Hydraulics 0 Under consideration

4 VOTE

Progress bar to show status of results being downloaded from the cloud

By default, ICM Cloud simulations store results in the cloud. When downloading results to a local results folder, the 'Status' in the 'Job Control' window only displays 'Downloading results' without providing details such as the amount of data dow...

Rahul Raj 3 months ago in InfoWorks ICM / Results 2 Under consideration

Please enter your email address

FILTER BY CATEGORY