All ideas

Showing 1383 of 1383

Different shape sluice or pipe/orifice closure option

We usually model closed gates as sluices, as they are the ones that can easily be closed (by setting the height to zero). The downside of this is that it can only be a rectangle (and it usually closes off a round pipe). An orifice now has the nice...

Marcel Glasbergen almost 3 years ago in InfoWorks ICM / Orifice / RTC 0 Gathering support

3 VOTE

Store MSX data in Data Sets that could be used in DB Editor and Scenario Management

Currently, all MSX data like Initial Quality and Quality Source data is stored in the MSX model itself, which makes scenario management for MSX models very tedious. It would be much more intuitive and efficient if MSX data was stored in Data Sets ...

Grant Clemens over 1 year ago in InfoWater Pro / Water Quality 0 Gathering support

13 VOTE

Orifice to limit flow in both directions

A limiting discharge set on an orifice should limit flow in both directions. Currently, the orifice limits flow in the forward direction; however, flow can go in the reverse direction at an unlimited rate. Hydraulically, if there is a physical fea...

Guest about 6 years ago in InfoWorks ICM / Hydraulics / Orifice 0 Gathering support

4 VOTE

Add a Brownfield Runoff tool under Preliminary Sizing > Calculators in the ribbon

To assist with initial site assessment, a brownfield runoff tool with printable reporting for the chosen rainfall events would be useful in the Preliminary sizing ribbon to allow analysis of brownfield and greenfield runoff rates from the same loc...

Guest almost 2 years ago in InfoDrainage / Hydrology 2 Already exists

10 VOTE

Show worst case analysis on long sections

I would like to be able to see the worst case across multiple simulations (highest water levels) along the 1d network when reviewing results. Essentially being able to visualize statistical report results in a long section.

Guest over 4 years ago in InfoWorks ICM / Long Section / Profile / Results 1 Gathering support

5 VOTE

Easier to interrogate log results file

In the review of a model we use the log results to identify whether the model has particular problems and review the overall mass balance. The log results are in text format and it is fairly annoying scrolling through the find the items needed. Co...

Guest over 2 years ago in InfoWorks ICM / Reporting 1 Gathering support

10 VOTE

Long-sections: Centre Geoplan on the selected link

It would be handy if the Geoplan centred on the selected link when selecting a long section. It seems every time select a long-section the windows split into two halves, one for the geoplan, the other for the long-section. As a result the link I j...

Benjamin Mauck almost 5 years ago in InfoWorks ICM / Long Section / Profile 0 Gathering support

2 VOTE

ICM InfoWorks SWMM5 Tools

ICM InfoWorks Networks has a long history of being both a great modeling platform but having a lot of SWMM5 features. To name a few, there is SWMM Runoff, SWMM Horton, SWMM Snowmelt, SWMM Green Ampt Infiltration, SWMM5 Water Quality, SWMM5 RTK, SW...

Robert Dickinson 12 months ago in InfoWorks ICM / Hydrology 0 For Review

2 VOTE

Consistent names and icons

Use the same name for things everywhere. For example, in the Model Explorer there is a "Modeling" section. In the DB editor, the field listed in the "Modeling" section are found in the "Hydraulic data" tables. Icons are also often different in dif...

Colin Ricks 12 months ago in InfoWater Pro / Productivity 0 For Review

2 VOTE

Batch run should work for run types other than standard

Batch run can only do standard runs. It is currently not possible to do fire flow, surge, pipe break, etc., as batch. Maybe add "Simulation type" to the General tab of the scenario explorer?

Colin Ricks 12 months ago in InfoWater Pro / Productivity 0 For Review

Please enter your email address

FILTER BY CATEGORY