Ideas

Showing 22 of 1370

Design ARV & Washout size - Simulate losses & airflow during system drain down

As a planning and design team, we need to size air valves and wash outs for our system so that large pipes can be drained for maintenance in a timely manner. InfoWorks WS Pro models the draindown of water after isolation, but it doesn't take into ...

Nathan Gerdts about 2 months ago in InfoWorks WS Pro / Operations 0 For Review

3 VOTE

Add a feature for deselection of a group of elements in Geoplan

Many times we use polygon select feature to select elements in a particular extent, but there is no option of deselecting a small area within that selection - like in Arc Map

Ashwini 10 months ago in InfoWorks WS Pro / Operations 1 Gathering support

15 VOTE

Add a result grid window for cross sections

Currently there is not a grid results window to show all cross sections. Would be helpful to have one. Also would be good if the grid window can show geometric elements of each cross section, such as bank levels, flow area, wetted perimeter, hydra...

Guest over 4 years ago in InfoWorks ICM / Grids / Results 0 Gathering support

21 VOTE

Customization of Grid Windows in InfoWorks ICM

Allow custom grid window layouts in InfoWorks ICM, much like the Property window. Allow the user to reorganize the columns, change the column widths, or hide unnecessary columns, and save it as a layout to be applied as a default.

Dave White about 6 years ago in InfoWorks ICM / Grids 9 Gathering support

4 VOTE

Export mesh ground levels to a ground model grid file

Using 2D mesh zones and mesh level zones can quickly get messy and difficult to visualise the changes that have been made and compare them to nearby ground levels. If there was a function to turn the ground levels of a mesh into a ground model gri...

Daniel Bloomfield about 1 year ago in InfoWorks ICM / Grids 1 Gathering support

7 VOTE

Sorting a conduit grid table based on upstream-downstream order (or vice-versa)

Help to sort a grid table (such as conduit) in order of upstream to downstream or vice-versa will be very helpful to modellers.

Guest over 2 years ago in InfoWorks ICM / Grids 0 Gathering support

5 VOTE

Retain decimal places when copying/pasting grid values

For most numerical values in a model, ICM can hold 8 decimal places. From the grid view, if you copy/paste a single cell value, the full set of decimal values are preserved. However, if you copy multiple cell values at once (e.g. an entire column)...

Jason Kulsdom almost 3 years ago in InfoWorks ICM / Grids / Reporting 0 Gathering support

1 VOTE

Option to compare Simulations of different time ranges superimposed on one graph [IWLive]

As an operator, I want to compare today's forecasted operations with different days in the past so I can see alternative ways how similar situations played out and make decisions with confidence. IWLive already offers functionality to compare two ...

Nathan Gerdts 7 months ago in InfoWorks WS Pro / Operations 0 For Review

2 VOTE

Distribution Network Energy Optimization

Minimize the pumping costs of water distribution while satisfying water demand and operational constraints (water levels, pressure, pump station capacities, future maintenance operations, etc).

Nathan Gerdts over 1 year ago in InfoWorks WS Pro / Operations 0 Gathering support

2 VOTE

ICM SWMM should show the Pipe Slope and Full Flow (PFC) on the Properties Dialog

While it might seem like a small detail, the ability to access the same properties on a Grid in ICM SWMM that were available in InfoSWMM can significantly enhance user experience. Many users request to see properties such as pipe slope and PFC val...

Robert Dickinson over 1 year ago in InfoWorks ICM / Grids 0 Gathering support

Please enter your email address

FILTER BY CATEGORY