Ideas

Showing 33 of 1370

GPU for 2D Erosion Deposition Model

The 2D erosion-deposition model can only be simulated on the CPU. For 2D rain-on-mesh models with GPU simulation times spanning hours, it becomes impractical to integrate the 2D erosion-deposition model, as CPU simulation times would extend into d...

Daniel Fensom about 2 years ago in InfoWorks ICM / Water Quality 0 Gathering support

10 VOTE

Using SWMM5 treatment equations at a node or link in ICM Networks

Users would like to use SWMM5 Buildup Washoff in ICM Networks AND the SWMM5 treatment equations at a node or link in the ICM St Venant solution. ICM SWMM networks have both options but for the purposes of using the powerful routing solution in I...

ROBERT DICKENSON over 4 years ago in InfoWorks ICM / Treatment / Water Quality 2 Gathering support

6 VOTE

Sediment depth variable for Storage nodes

It appears that amounts of sediment are carried along when water is overflowing over the banks of the river: part of the sediment from sediment fractions SF1 and SF2 leaves the river and goes to the Storage Areas during flooding. Although this is ...

Edith Maroy almost 3 years ago in InfoWorks ICM / Sediment / Simulations 0 Gathering support

1 VOTE

Option to compare Simulations of different time ranges superimposed on one graph [IWLive]

As an operator, I want to compare today's forecasted operations with different days in the past so I can see alternative ways how similar situations played out and make decisions with confidence. IWLive already offers functionality to compare two ...

Nathan Gerdts 7 months ago in InfoWorks WS Pro / Operations 0 For Review

10 VOTE

Can ICM add particle tracking module?

When there are pollutants that enter a system from various sources then it would be good to have pollutant tracing functionality which shows the source and the pollutant moving through the system, giving an idea of the rate at which it travels and...

Guest about 6 years ago in InfoWorks ICM / Water Quality 1 Gathering support

2 VOTE

Distribution Network Energy Optimization

Minimize the pumping costs of water distribution while satisfying water demand and operational constraints (water levels, pressure, pump station capacities, future maintenance operations, etc).

Nathan Gerdts over 1 year ago in InfoWorks WS Pro / Operations 0 Gathering support

7 VOTE

Increased number of user pollutants

We would like to be able to trace pollutant sources through our 2D model. The way to do this would be to use the user defined pollutants . But... at the moment there are only four pollutants and potentially we'd have many different sources that we...

Richard Body over 5 years ago in InfoWorks ICM / Pollutants / Water Quality 1 Gathering support

7 VOTE

Modelling of mud and other non-Newtonian flows

We've a lot of work at the moment modelling the failure of tailings dams. Tailings dams typically have material that acts in a non-Newtonian manner. To effectively model these sorts of fluids would require the inclusion of additional fluid propert...

Richard Body almost 6 years ago in InfoWorks ICM / Hydraulics / Sediment 0 Gathering support

4 VOTE

odour

Air Phase Model Function - Can Innovyze consider to include air phase modelling function in InfoWorks? At moment, the odour modelling is done separately by various methods using the sewer hydraulic data as the input. As a result, the odour modelli...

XJ Wang over 3 years ago in InfoWorks ICM / Pollutants / Water Quality 0 Gathering support

5 VOTE

Allow pollutographs to apply on subcatchments

At the moment it is not possible to set a pollutograph for subcatchments, and the modeller is obliged first to run the hydrology, export the hydrograph, re-import the hydrograph as inflow, and finally re-run with a pollutograph

Richard Body about 6 years ago in InfoWorks ICM / Hydrology / Pollutants 0 Gathering support

Please enter your email address

FILTER BY CATEGORY