Ideas

Showing 140 of 1370

VSP Control based on Tank Head/Level

Currently you can only use Junction Pressure setpoints or Pump Flow setpoints in the VSP Control dialogue. It would be helpful to be able to use a Tank Level/Head setpoint to adjust the pump speed as well. This is possible in competitor products l...

Grant Clemens over 2 years ago in InfoWater Pro / Operational Modeling 3 Under consideration

2 VOTE

Steady state simulations for different times or for average demand

Steady state simulations are useful for 1) evaluating an initial or simplified version of a model (for example with average demands) or 2) evaluating a specific condition (like maximum demand, etc.) without much complexity. If your model is alread...

Felipe Hernandez 4 months ago in InfoWater Pro / Engine 0 Gathering support

11 VOTE

Please add an Innovyze section to the autodesk forums

Hello, Innovyze previously had a forum available for their products. After the software was purchased by autodesk, this no longer seems to exist. I believe having a forum where users can post questions and troubleshoot their issues would be very h...

Endrit Shabani almost 2 years ago in InfoWater Pro / Other 2 Gathering support

9 VOTE

Add a new Special Query for "Demand Junctions" in the Domain Manager

Currently you have to either make your own tediously long query, or you can run a simulation and use output filters, but it should exist as a built-in Special Query.

Grant Clemens over 1 year ago in InfoWater Pro / Productivity 1 Gathering support

5 VOTE

Totalizer Valve and Controls

It would be very useful to have a totalizer valve which closes after a certain amount of flow passes through over a given time, such as 5 MGD over a day, then reopens once that time period has passed. Alternatively, a control option based on a pip...

Guest 12 months ago in InfoWater Pro / Operational Modeling 1 Under consideration

12 VOTE

Adding Level 3/4 water quality processing to the ICM upm tool.

For future catchment studies, we are looking at completing higher levels of water quality impact assessment, Level 3/Level 4. For this we would like the UPM tool to be able to integrate ICM river models to represent river flows and river quality a...

Guest over 2 years ago in InfoWorks ICM / Water Quality 0 Gathering support

4 VOTE

Default tank symbol

Can you change the default tank symbol color back to the dark blue that it used to be? The teal color is very light, making it difficult to see and hard to differentiate from the reservoir symbol. I know I can change this in preferences, but it wo...

Colin Ricks 10 months ago in InfoWater Pro / Productivity 0 Under consideration

3 VOTE

InfoSurge velocity results

Please add pipeline velocities to the results for surge simulations. This really helps when designing surge tanks and connecting pipelines.

Guest 8 months ago in InfoWater Pro / Engine 1 For Review

11 VOTE

ICM UPM tool - running all impact durations at the same time

For any CSO assessment we do, we always have to compare standards for all impact durations (1hr, 6hr, 24hr). We’ve found setting up the tool the exact same way 3 separate times, only selecting a different impact duration, very slow and inefficient...

Guest over 2 years ago in InfoWorks ICM / Water Quality 0 Gathering support

4 VOTE

"Initially Closed" and "Check Valve Direction" symbology should adhere to the "show inactive elements" toggle

This is simple enough to do by adding a definition query on the MOTYPE field in conjunction with the existing DSPCODE filter, but currently I would have to manually change this for 4 layers every time I toggle display of inactive elements.

Eric King 11 months ago in InfoWater Pro / Other 1 In progress

Please enter your email address

FILTER BY CATEGORY