Autodesk
ADD A NEW IDEA

Clear

Ideas

    Showing 348 of 1372

    Weir coefficients

    Expand the allowable range of weir discharge coefficients in InfoDrainage and provide an optional depth–coefficient user defined table to improve modeling flexibility and accuracy. Weir discharge coefficients (English units) typically range betwee...
    Guest 4 months ago in InfoDrainage / Hydraulics 0 For Review

    VSP Control based on Tank Head/Level

    Currently you can only use Junction Pressure setpoints or Pump Flow setpoints in the VSP Control dialogue. It would be helpful to be able to use a Tank Level/Head setpoint to adjust the pump speed as well. This is possible in competitor products l...
    Grant Clemens over 2 years ago in InfoWater Pro / Operational Modeling 3 Under consideration

    Button: Apply to all phases

    To each of the build screens, next to "apply", add another button, "apply to all phases". This would save a lot of time when making tweaks to models for which more than one phase is being run (which is most models)
    Guest about 1 year ago in InfoDrainage / Hydraulics 0 For Review

    Please add an Innovyze section to the autodesk forums

    Hello, Innovyze previously had a forum available for their products. After the software was purchased by autodesk, this no longer seems to exist. I believe having a forum where users can post questions and troubleshoot their issues would be very h...
    Endrit Shabani almost 2 years ago in InfoWater Pro / Other 2 Gathering support

    Steady state simulations for different times or for average demand

    Steady state simulations are useful for 1) evaluating an initial or simplified version of a model (for example with average demands) or 2) evaluating a specific condition (like maximum demand, etc.) without much complexity. If your model is alread...
    Felipe Hernandez 4 months ago in InfoWater Pro / Engine 0 Gathering support

    Pipe names missing in export from Civil3D

    When exporting pipes from Civil3D to Infodrainage, the pipe names keep reverting to the autogenerated names given when pipe is created in Civil3D even though they were renamed in Civil3D.
    Jenna Woyner almost 2 years ago in InfoDrainage / Civil3D Integration 1 Under consideration

    Level Soffits in pipe network.

    Although you can select Level Soffits in the Network Wizard, if you make a change in the manhole depth for example, the pipes in the network will return to invert level, which means that you will have to readjust them manually.
    Konstantinos Koutroulis almost 2 years ago in InfoDrainage / Hydraulics 1 In progress

    Go To button to zoom to a certain pipe from the Connection table

    In Civil 3D you can zoom to/select a pipe from the pipe table. It is very difficult to find specific pipes in InfoDrainage.
    Daniel'le DeVoss 9 months ago in InfoDrainage / Auditing / Reviewing 0 For Review

    Allow two Infodrainage files to be combined

    Request for a paste, copy, cut branch to file options, to allow two Infodrainage files to be combined. As the available in Microdrainage
    Guest over 1 year ago in InfoDrainage / Other 2 Under consideration

    Calculating and adding the Froude number to storm table output

    Many municipalities and utilities want to maintain subcritical flow in the storm sewer system and avoid hydraulic jumps. The Froude number is used to establish subcritical vs. supercritical flow.
    Guest about 1 year ago in InfoDrainage / Reporting 2 For Review

    Disclaimer: The development, release, and timing of any features or functionality described or discussed for our products in this User Feedback Forum for Autodesk Water Products and Services remains at our sole discretion. This User Feedback Forum for Autodesk Water Products and Services is not a commitment, promise, or legal obligation to deliver any functionality, is intended solely to outline and gather feedback about our general product direction, and should not be relied on in making purchasing decisions.

    Privacy | Cookie preferences