Autodesk
ADD A NEW IDEA

Clear

Ideas

    Showing 868 of 1442

    Work Order Close & Follow Up

    No description provided
    Mike Maylone about 3 years ago in Info360 Asset / Work Management 0 Under consideration

    When Survey Length is Different than pipe length, do not give a warning unless it is larger than 5ft difference.

    Many inspections end up with warnings when this very common issue comes up. Most of the time survey length and pipe length will be different because the GIS is not 100% perfect.
    Guest about 3 years ago in Info360 Asset / Inspection & Media Management Workflows 1 Gathering support

    Compare WWG and TWG files

    A tool to compare different WWG files and TWG files and report on the differences, similar to the Compare functionality for Networks.
    Guest about 3 years ago in InfoWorks ICM / Import data 1 Gathering support

    Info360 Asset - Condition Grade Profile

    The condition grade profile is an extension to the scoring for CCTV surveys. In addition to the normal scoring (peak scores, etc.) a survey can be broken down into grades. The percentage of grades present from 1 to 5 can be calculated for each pip...
    Tony Andrews about 3 years ago in Info360 Asset 0 For Review

    Remove the 'Admin' page for Viewer and Field Inspector users.

    This is to prevent these users from accidentally editing this information without the Admin/Full access permission.
    Martha Nunez about 2 years ago in Info360 Asset 3 Already exists

    Temperature variation for the PSO bulk chlorine decay model in the MSQ module of InfoWorks

    The reactive-constituent (PSO) chlorine decay model (Fisher et al. 2017) was provided to users in the MSQ module of InfoWorks in July 2020 (see the MSQ blog for details). A major advantage of this model is that only a single set of four model coef...
    Guest over 4 years ago in InfoWorks WS Pro / Engine 1 Gathering support

    Add differentiator between Plant/Asset/Insight on top left corner

    I think it would be helpful to add the word Plant, Asset or Insight next to the Info360 Logo on the upper left corner. Please see image below for reference.
    Salvador Bentolila over 3 years ago in Info360 Asset / General 1 Gathering support

    ICM sims updated with better control on sims outcome

    I think waiting a big time for a sim to be done and then because the sim results disk gets full, loosing all of the simulated data is something that should be prevented from the time someone sends the simulation. A warning should be issued when yo...
    Ionut Pintea over 5 years ago in InfoWorks ICM / Simulations 0 Gathering support

    Add calibration criteria

    Add in ability to review calibration in the model using calibration criteria such as those contained in the CIWEM COP
    Guest over 3 years ago in InfoWorks ICM / Calibration 0 Gathering support

    Allow sequencing of simulations and selections lists

    It would be good if we can change the sequence of the simulations, selection sets etc to make them easier to find - especially when creating different scenarios
    Ashwini about 1 year ago in InfoWorks WS Pro / Other 1 For Review

    Disclaimer: The development, release, and timing of any features or functionality described or discussed for our products in this User Feedback Forum for Autodesk Water Products and Services remains at our sole discretion. This User Feedback Forum for Autodesk Water Products and Services is not a commitment, promise, or legal obligation to deliver any functionality, is intended solely to outline and gather feedback about our general product direction, and should not be relied on in making purchasing decisions.

    Privacy | Cookie preferences