Autodesk
ADD A NEW IDEA

All ideas

    Showing 1387 of 1387

    Adding Sediment Basin Design Function

    It would be helpful if we can design sediment basins in infodrainage as another stormwater control and phase
    Jenna Woyner almost 2 years ago in InfoDrainage / Other 2 Will not implement

    Daytime and Night-time Agent Options

    In my team, ICM simulations are spread out to run across all of our modelling PCs, via the coordinator. However, we are struggling to reach a compromise in setting the "Max threads total" value for some users - the balance between letting sims com...
    Jason Kulsdom over 2 years ago in InfoWorks ICM / Performance 1 Will not implement

    Orifice to limit flow in both directions

    A limiting discharge set on an orifice should limit flow in both directions. Currently, the orifice limits flow in the forward direction; however, flow can go in the reverse direction at an unlimited rate. Hydraulically, if there is a physical fea...
    Guest about 6 years ago in InfoWorks ICM / Hydraulics / Orifice 0 Gathering support

    Different shape sluice or pipe/orifice closure option

    We usually model closed gates as sluices, as they are the ones that can easily be closed (by setting the height to zero). The downside of this is that it can only be a rectangle (and it usually closes off a round pipe). An orifice now has the nice...
    Marcel Glasbergen almost 3 years ago in InfoWorks ICM / Orifice / RTC 0 Gathering support

    Show worst case analysis on long sections

    I would like to be able to see the worst case across multiple simulations (highest water levels) along the 1d network when reviewing results. Essentially being able to visualize statistical report results in a long section.
    Guest almost 5 years ago in InfoWorks ICM / Long Section / Profile / Results 1 Gathering support

    Navigation through Analytics

    When navigating through the Analytics, it is not possible to search/filter them, for example, by Analytic Name or Owner. However, this is possible when navigating through the Workspaces. When the list of analytics grows, it becomes critical to fil...
    Javier Coronado 12 months ago in Info360 Insight / Tools / Analytics 0 In progress

    Long-sections: Centre Geoplan on the selected link

    It would be handy if the Geoplan centred on the selected link when selecting a long section. It seems every time select a long-section the windows split into two halves, one for the geoplan, the other for the long-section. As a result the link I j...
    Benjamin Mauck almost 5 years ago in InfoWorks ICM / Long Section / Profile 0 Gathering support

    Add a Brownfield Runoff tool under Preliminary Sizing > Calculators in the ribbon

    To assist with initial site assessment, a brownfield runoff tool with printable reporting for the chosen rainfall events would be useful in the Preliminary sizing ribbon to allow analysis of brownfield and greenfield runoff rates from the same loc...
    Guest almost 2 years ago in InfoDrainage / Hydrology 2 Already exists

    User Defined Depth w Bulletin 75 Distribution

    For many of our models, we use Bulletin 75 for design storm depth and distribution. Bulletin 75 is currently only a distribution option within the NOAA 14 rainfall generator. Having a generator where user-defined rainfall depths are input and the ...
    Henry Schmitz over 1 year ago in InfoWorks ICM / Rainfall 1 Will not implement

    Store MSX data in Data Sets that could be used in DB Editor and Scenario Management

    Currently, all MSX data like Initial Quality and Quality Source data is stored in the MSX model itself, which makes scenario management for MSX models very tedious. It would be much more intuitive and efficient if MSX data was stored in Data Sets ...
    Grant Clemens over 1 year ago in InfoWater Pro / Water Quality 0 Gathering support

    Disclaimer: The development, release, and timing of any features or functionality described or discussed for our products in this User Feedback Forum for Autodesk Water Products and Services remains at our sole discretion. This User Feedback Forum for Autodesk Water Products and Services is not a commitment, promise, or legal obligation to deliver any functionality, is intended solely to outline and gather feedback about our general product direction, and should not be relied on in making purchasing decisions.

    Privacy | Cookie preferences