Ideas

Showing 556 of 1372

Infoworks ICM- Sewage Temperature Modelling and Heat Losses

The following features should be added to Infoworks ICM for modelling temperature impacts for Heat extraction or heat insertion projects: - Sewage temperature to be added in WWG file as a pollutograph parameter and can also be defined in a diurnal...

Guest about 5 years ago in InfoWorks ICM / Temperature / Wastewater 0 Gathering support

4 VOTE

Cross and Longitudinal Slope for Surface SuDS features

Currently, when you try to model surface features, such as porous pavement, you can only adjust the longitudinal slope. However, when you try to model roads for example, you often have a separate cross fall, which I believe would be a useful addit...

Konstantinos Koutroulis almost 2 years ago in InfoDrainage / Other 1 Gathering support

4 VOTE

Add the ability to drain subcatchments to the grate of a gully

When importing models from XPSWMM to ICM, my subcatchments drain directly to the node where an inlet capture curve is applied to limit flow to the 1d system. I would like to replicate this behavior easily in ICM when nodes are connected to the 2D ...

Sophia Buchanan almost 2 years ago in InfoWorks ICM / Inlets 0 Gathering support

10 VOTE

Show worst case analysis on long sections

I would like to be able to see the worst case across multiple simulations (highest water levels) along the 1d network when reviewing results. Essentially being able to visualize statistical report results in a long section.

Guest over 4 years ago in InfoWorks ICM / Long Section / Profile / Results 1 Gathering support

13 VOTE

Orifice to limit flow in both directions

A limiting discharge set on an orifice should limit flow in both directions. Currently, the orifice limits flow in the forward direction; however, flow can go in the reverse direction at an unlimited rate. Hydraulically, if there is a physical fea...

Guest about 6 years ago in InfoWorks ICM / Hydraulics / Orifice 0 Gathering support

10 VOTE

Long-sections: Centre Geoplan on the selected link

It would be handy if the Geoplan centred on the selected link when selecting a long section. It seems every time select a long-section the windows split into two halves, one for the geoplan, the other for the long-section. As a result the link I j...

Benjamin Mauck over 4 years ago in InfoWorks ICM / Long Section / Profile 0 Gathering support

7 VOTE

Ability to snap to DWG or GIS background layers

When moving a manhole, I would like to snap to drawing geometry

Guest over 3 years ago in InfoWorks ICM / Productivity / Visualization 0 Gathering support

3 VOTE

Building Objects and Damage Receptors

https://www.fema.gov/grants/guidance-tools/benefit-cost-analysis/full-bca#download Need better support for Buildings to follow USACE BCA analysis

Guest over 1 year ago in InfoWorks ICM / 2D Flooding 1 Gathering support

12 VOTE

Infoworks - Pipe grade calculator

Pipe grade calculator between US and DS inverts, Ultimately having the ability to calculate downstream or upstream inverts over a long network based on a specified grade from either a DS or US invert level as a starting point.

Guest over 5 years ago in InfoWorks ICM / Hydraulics 1 Gathering support

6 VOTE

Update French rainfall to include multiple durations

Ability to add more than 1 duration per return period in a single rainfall object. There are 3 sets of parameters for durations 6 < t < 60, 60 < t < 360 and 360 < t < 24hr. It would be useful to be able to add these parameter...

Guest almost 3 years ago in InfoWorks ICM / Rainfall 1 Gathering support

Please enter your email address

FILTER BY CATEGORY