Autodesk
ADD A NEW IDEA

Clear

Ideas

    Showing 113 of 1370

    Orifice to limit flow in both directions

    A limiting discharge set on an orifice should limit flow in both directions. Currently, the orifice limits flow in the forward direction; however, flow can go in the reverse direction at an unlimited rate. Hydraulically, if there is a physical fea...
    Guest about 6 years ago in InfoWorks ICM / Hydraulics / Orifice 0 Gathering support

    Building Objects and Damage Receptors

    https://www.fema.gov/grants/guidance-tools/benefit-cost-analysis/full-bca#download Need better support for Buildings to follow USACE BCA analysis
    Guest over 1 year ago in InfoWorks ICM / 2D Flooding 1 Gathering support

    Infoworks - Pipe grade calculator

    Pipe grade calculator between US and DS inverts, Ultimately having the ability to calculate downstream or upstream inverts over a long network based on a specified grade from either a DS or US invert level as a starting point.
    Guest over 5 years ago in InfoWorks ICM / Hydraulics 1 Gathering support

    Wide "Oval" shape ID

    conduit shape ID "Oval" only allows Height > With. So for "horizontally" wide oval conduits a new conduit shape has te be defined. It would be practical if the standard "Oval" also allows a with greater than the hight.
    Guest almost 6 years ago in InfoWorks ICM / Hydraulics 0 Gathering support

    RTC Debugging Interface and Support

    It would be really useful to have a debugging module for the RTC components in InfoWorks ICM so that one can go step by step through a simulation to display in simulation RTC values-things like variable values (e.g. timers), range/logic values, ac...
    Guest over 4 years ago in InfoWorks ICM / API / Exchange / RTC 1 Gathering support

    Inlet pump

    We are mode and more incorporating surface water systems in our ICM models and part of those systems are inlet pumps that respond to the downstream levels instead of the upstream levels. Up until now, the only way to achieve this is by creating an...
    Marcel Glasbergen over 2 years ago in InfoWorks ICM / Pumps / RTC 0 Gathering support

    Allow the user to choose the flood type of pond or storage nodes

    Allow the user to choose the flood type of pond or storage nodes from a drop down as is the case for manholes. As opposed to the current state where the flood type depends on the relationship between the highest level entry in the storage array an...
    Lizzie about 4 years ago in InfoWorks ICM / Hydraulics 0 Gathering support

    Drain to 2D line source from subcatchment

    The current function allows rainfall runoff to be given to a node, link, multiple links and 2D point source, but not to 2D line source. We are modelling rivers with 2D meshes, but thinking to represent rainfall runoff with subcatchments, as it is ...
    Miyuki Okuda about 4 years ago in InfoWorks ICM / 2D Flooding / Hydraulics 0 Gathering support

    River reach theming

    It would be great if a river reach could be themed individually across the left and right banks and if theming were more flexible for storage areas too.
    Guest almost 6 years ago in InfoWorks ICM / River Modeling / Visualization 0 Gathering support

    Lateral inflows from event data for rivers

    Currently it is possible to add lateral inflows to a river via subcatchments, if we could also do this directly from event data or TSDB that would be great.
    Guest almost 6 years ago in InfoWorks ICM / Events / Flow / Hydraulics 0 Gathering support

    Disclaimer: The development, release, and timing of any features or functionality described or discussed for our products in this User Feedback Forum for Autodesk Water Products and Services remains at our sole discretion. This User Feedback Forum for Autodesk Water Products and Services is not a commitment, promise, or legal obligation to deliver any functionality, is intended solely to outline and gather feedback about our general product direction, and should not be relied on in making purchasing decisions.

    Privacy | Cookie preferences