Autodesk
ADD A NEW IDEA

Clear

Ideas

    Showing 76 of 1370

    Add node level (hydraulic grade line) data to custom graphs for calibration

    Allow for the ability to compare observed and predicted level data (or hydraulic grade lines) at nodes. Instead of depth in the pipe, I typically have water surface elevations at a node, specifically for treatment plant hydraulic modeling.
    Guest over 5 years ago in InfoWorks ICM / Calibration / Labels / Results 0 Gathering support

    AutoCAD objects on Conversion

    As a user, I would like InfoWorks to recoginze Civil3D objects as objects and not require me to resolve the model to dumb elements
    Guest about 6 years ago in InfoWorks ICM / Hydraulics / Import data / Terrain 0 Gathering support

    Infoworks ICM - Contours and Labels

    Infoworks - ICM Contours with labels to be shown on ground model
    Guest over 5 years ago in InfoWorks ICM / Terrain 1 Gathering support

    Auto populate an incremental ID for objects such as lines/polygons/subcatchments etc.

    Often source data is provided with a non unique ID. Nodes auto generate an ID, and conduits will create a node, but the remaining asset classes struggle somewhat and often you need to manipulate the GIS data. I would like to be able to have ICM...
    Ann Pugh over 5 years ago in InfoWorks ICM / Data Exchange / GIS Layers / Import data 0 Gathering support

    ICM Status bar to show more significant figures

    The status bar currently only displays levels (ground model level, water depth) to 1 decimal place. 2 Decimal places would be much more useful, Especially to ensure a node is at a low point or in the gutter invert..
    Gregory Smith almost 5 years ago in InfoWorks ICM / Productivity / Visualization 1 Gathering support

    Make Grips Visibile

    Lets get Grips, and make them visible! Autodesk is damn good at this. ICM is not.
    Guest about 2 years ago in InfoWorks ICM / Visualization 0 Gathering support

    compatibility with WMTS servers

    Compatibility with WMTS servers for the GIS layer control would be very urgent. Right now a lot of data is only to project from WMTS servers.
    Richard Wilbrink about 3 years ago in InfoWorks ICM / GIS Layers / Import data 0 Gathering support

    Include groundlevel as attribute in export network 2D mesh elements

    When you export a model to shape for example, only the element id is included. You have to run a simulation (for a second) and then exporting maximum reveales the element ground level. It saves time to add the mesh element level to the export. Alt...
    Jan Meulen almost 6 years ago in InfoWorks ICM / Export Data / Terrain 0 Gathering support

    Tile only for selected windows

    Choose which Windows are used for Tile Horizontally or Tile Vertically. If a Geoplan and two Long Sections are open, we want to tile only the Long Sections, so a selection for the tiling would be useful.
    Guest almost 6 years ago in InfoWorks ICM / Productivity / Visualization 0 Gathering support

    I want Infoworks' "Export maxima to GIS" to include the below parameters to assist scour protection design within 2D Zone

    1. For shear-stress-based design 1.1 Max Shear Stress (in N/m2 with at least 1 digit after the decimal point) 1.2 Hydraulic Slope at Max Shear Stress (in percent with at least 3 digits after the decimal point) 2. For velocity-based design 2.1. Max...
    Phuong Mai over 3 years ago in InfoWorks ICM / Export Data / GIS Layers / Simulations 1 Gathering support

    Disclaimer: The development, release, and timing of any features or functionality described or discussed for our products in this User Feedback Forum for Autodesk Water Products and Services remains at our sole discretion. This User Feedback Forum for Autodesk Water Products and Services is not a commitment, promise, or legal obligation to deliver any functionality, is intended solely to outline and gather feedback about our general product direction, and should not be relied on in making purchasing decisions.

    Privacy | Cookie preferences