Autodesk
ADD A NEW IDEA

Clear

Ideas

    Showing 35 of 1442

    I want Infoworks' "Export maxima to GIS" to include the below parameters to assist scour protection design within 2D Zone

    1. For shear-stress-based design 1.1 Max Shear Stress (in N/m2 with at least 1 digit after the decimal point) 1.2 Hydraulic Slope at Max Shear Stress (in percent with at least 3 digits after the decimal point) 2. For velocity-based design 2.1. Max...
    Phuong Mai almost 4 years ago in InfoWorks ICM / Export Data / GIS Layers / Simulations 1 Gathering support

    Export results without the ICM interface

    I have found that exporting 2D zones results is very slow. I would ideally like to be able to export maximum 2D zones from a series of simulations without the need to open ICM. As an added feature I would like the exported GIS files (or whatever f...
    Guest over 2 years ago in InfoWorks ICM / Export Data 1 Gathering support

    As an organisation we would like to export the data exposed in show details view

    As an organisation we would like to export the data exposed in show details view in order to assist with reporting in relation disc storage/ utilisation i.e. ID associated with Model Group. We store all our DAP models within a single Db so collec...
    Richard Robinson over 5 years ago in InfoWorks ICM / Export Data / Workgroup 0 Gathering support

    Enhance import/export of SWMM models for ICM platform

    Enhance model import from SWMM5 INP files to include a few of the Open Data Import Center /Open Data Export Center options: • Only update existing records • Ignore existing objects • Overwrite, Merge, etc. • Export Selection only Ultimately we wan...
    Guest over 5 years ago in InfoWorks ICM / Export Data / Import data / InfoWorks / SWMM 1 Gathering support

    Add maintenance as a type of incident

    It would be useful if 'maintenance' was added as an incident type to allow sensor maintenance to be captured in Insight. This is applicable for a service provider installing sensors and monitoring a network on behalf of a client.
    Brad Thompson almost 3 years ago in Info360 Insight / Incident Manager 0 Under consideration

    Add support for Esri .lyrx files in InfoWorks and InfoAsset Manager

    LYRX files can store multiple layers and/or multiple group layers at the root level. LYR files are the extension used in Esri's ArcGIS versions 10. X and ArcGIS Desktop. LYR files can only store a single layer or a single group layer at the root l...
    Tony Andrews over 1 year ago in InfoWorks ICM / Data Exchange / Export Data / GIS Layers / Import data 0 Will not implement

    Consistent SHP Export Data Fields for 2D mesh elements in ICM

    A simulation result can be exported to SHP files by right clicking the icon and choosing the Export menu. When the result is exported for a specific timestamp, some underlying data fields are not exported such as the elevation and area of a 2D ele...
    Miyuki Okuda almost 5 years ago in InfoWorks ICM / Export Data 0 Gathering support

    Export both the result and the underlying property fields

    When the model results are displayed on the webpage through Exchange, since the basic properties need to be viewed, the corresponding basic properties of the results need to be exported first, and then the results are matched to the basic properti...
    Liu Qiusheng about 5 years ago in InfoWorks ICM / Export Data / Simulations 0 Gathering support

    Publish InfoWorks WSPro critical link analysis module results to Info360 Insight - Incident Manager (building on work done in Info360 Asset)

    With the InfoWorks WSPro Critical link analysis module results being made available within Info360 Asset for criticality/risk calculations - these results could potentially be valuable to operations in an incident or pipe break scenario (number of...
    Patrick Bonk over 2 years ago in Info360 Insight / Incident Manager 0 Under consideration

    Add the Detailed EPASWMM LID Detailed Report file for ICM InfoWorks and SWMM Networks

    Both ICM SWMM and ICM InfoWorks incorporate the EPASWMM's Low Impact Development (LID) or Sustainable Drainage Systems (SuDS) controls and Subcatchment features, offering a summary of LID inputs and outputs within the SWMM5 Report File (RPT file)....
    Robert Dickinson over 2 years ago in InfoWorks ICM / SUDS 0 Gathering support

    Disclaimer: The development, release, and timing of any features or functionality described or discussed for our products in this User Feedback Forum for Autodesk Water Products and Services remains at our sole discretion. This User Feedback Forum for Autodesk Water Products and Services is not a commitment, promise, or legal obligation to deliver any functionality, is intended solely to outline and gather feedback about our general product direction, and should not be relied on in making purchasing decisions.

    Privacy | Cookie preferences