Autodesk
ADD A NEW IDEA

All ideas

    Showing 241

    Multi-species water quality

    As a user I want to be able to handle multi-solute water quality defining my own set of equations (same as EPANET MSX)
    Guest about 6 years ago in InfoWater Pro 2 Launched

    InfoSurge Scenarios

    No description provided
    Guest about 6 years ago in InfoWater Pro 3 Launched

    Export 2D Result to Raster Grid of Depth and Hazard

    Damage Assesment tools (third-party) require depth and hazard raster grid input
    Guest about 6 years ago in InfoWorks ICM / 2D Flooding / Results 1 Launched

    Guidance (including examples) and solver assumptions in ICM help

    Could the ICM help be refreshed/updated and include more examples and/or details of the physics / assumptions / settings used by the simulation solver? Some examples below - Orifice control – Technical paper “Orifices” (June 2005) is not available...
    Giorgio Incelli about 3 years ago in InfoWorks ICM 0 Launched

    Default 'Start Time' for testing feed Time Range in Live Data Feed

    Currently in Test Feed window of Live Data Feed both 'Start Time' and 'End Time' default to now. It would be better if the 'Start Time' as in the past (e.g. today minus one day). That way when connect to live data from Pi or Scada some output woul...
    Guest over 5 years ago in InfoWater Pro 2 Launched

    Allow Ctrl+C and Ctrl+V in InfoWater Pro

    I could always copy and paste attributes via simple keyboard commands (Ctrl+C and Ctrl+V) in classic InfoWater, but can no longer do that in InfoWater Pro. You can right click and select "Copy" or "Paste", but that takes longer. Bring back keyboar...
    Guest over 5 years ago in InfoWater Pro 0 Launched

    water age - representing re-chlorination station by resetting age to 0 hrs

    Depending on the size of the distribution/reticulation system water is often chlorination at the WTP and re-chlorinated at various locations within the network. There is no way to reset the water age value at a reservoir or node etc. to represen...
    Guest almost 6 years ago in InfoWorks WS Pro 0 Launched

    Max or Min Flow values should not depend on the pipe direction. i.e. the value being positive or negative depend on the pipe direction

    Currently, if the flow direction through the pipe is opposite to the direction of the pipe drawn it shows as a negative flow value. So if the flow goes both direction during the run, smaller positive value shows as the maximum flow and larger nega...
    Guest almost 5 years ago in InfoWater Pro 1 Launched

    Individual vertex point visibility in GeoPlan

    When an individual point is selected in river section data, this is not dynamically shown on the GeoPlan like a cross section might be. It would be good if vertex points were also visible.
    Guest almost 6 years ago in InfoWorks ICM 1 Launched

    Allow configurable On and Off values for pump statuses

    Some systems report pump status "0" for off and "1" for on. Others report "1" and "2" respectively. It would be nice for this to be a global setting so that pump performance, pump status charts, the pump station dashboard can all use the right val...
    Pete Mcintosh over 1 year ago in Info360 Insight / Spatial Data 0 Launched

    Disclaimer: The development, release, and timing of any features or functionality described or discussed for our products in this User Feedback Forum for Autodesk Water Products and Services remains at our sole discretion. This User Feedback Forum for Autodesk Water Products and Services is not a commitment, promise, or legal obligation to deliver any functionality, is intended solely to outline and gather feedback about our general product direction, and should not be relied on in making purchasing decisions.

    Privacy | Cookie preferences