Ideas

Showing 18 of 1370

Attenuation Volume Summary Analysis

It would be useful to have access to a table that summarises all the attenuation volumes within the site include elements such as tanks, filter trenches, pipes, manholes etc. Similar to what was available in MicroDrainage

Guest about 1 year ago in InfoDrainage / Auditing / Reviewing 2 Under consideration

14 VOTE

Add ability to see all pipes in Network Design Report

It is not possible to view the details / preliminary results of all the connections in the Network Design Report (each flow path needs to be selected in turn). This can be awkward for large networks.

Matthew Johnson about 1 year ago in InfoDrainage / Auditing / Reviewing 0 For Review

8 VOTE

Ability to change flow path in the profile view

It would be very convenient to be able to select a different flow path from within the long section (profile) view.

Matthew Johnson about 1 year ago in InfoDrainage / Auditing / Reviewing 0 For Review

1 VOTE

Design ARV & Washout size - Simulate losses & airflow during system drain down

As a planning and design team, we need to size air valves and wash outs for our system so that large pipes can be drained for maintenance in a timely manner. InfoWorks WS Pro models the draindown of water after isolation, but it doesn't take into ...

Nathan Gerdts about 2 months ago in InfoWorks WS Pro / Operations 0 For Review

2 VOTE

More informative Analysis Error messages in InfoDrainage

A common error in InfoDrainage is "The analysis has encountered an error and has been stopped." with no additional troubleshooting guidance, or hints about where the error originated. See some of the typical causes here: It would be helpful to hav...

Daniel'le DeVoss 4 months ago in InfoDrainage / Auditing / Reviewing 2 Gathering support

7 VOTE

Sort and collapse all option in flowpath Network Design Report

It would be useful to be able to ‘collapse all’ for branches in the Network Design Report. It would also be useful to be able to sort the connections (and junctions) in order of upstream→downstream or alpha/numeric. At the moment it seems rather a...

Matthew Johnson about 1 year ago in InfoDrainage / Auditing / Reviewing 0 For Review

4 VOTE

Go To button to zoom to a certain pipe from the Connection table

In Civil 3D you can zoom to/select a pipe from the pipe table. It is very difficult to find specific pipes in InfoDrainage.

Daniel'le DeVoss 9 months ago in InfoDrainage / Auditing / Reviewing 0 For Review

6 VOTE

Enable 3d view of two phases (foul and surface) simultaneously to help resolve clashes found in clash analysis.

Clash Analysis identifies pipes touching, which may be in different phases. The ability to view both phases in 3D View (as you can in Plan View) would make resolving the clashes much more efficient.

Guest about 1 year ago in InfoDrainage / Auditing / Reviewing 0 For Review

5 VOTE

Show catchment areas of non-current phases

It is useful to be able to see the catchment areas of non-current phases if they have visibility switched on. For example, to make sure that a whole site with multiple outfalls has the total catchment digitised with no gaps.

Matthew Johnson about 1 year ago in InfoDrainage / Auditing / Reviewing 0 For Review

3 VOTE

Add a feature for deselection of a group of elements in Geoplan

Many times we use polygon select feature to select elements in a particular extent, but there is no option of deselecting a small area within that selection - like in Arc Map

Ashwini 10 months ago in InfoWorks WS Pro / Operations 1 Gathering support

Please enter your email address

FILTER BY CATEGORY