Autodesk
ADD A NEW IDEA

Clear

Hydraulics

    Showing 9

    Clarify roof height measurement for weirs or reference roof height by absolute elevation rather than relative to weir crest

    The current help documentation for weirs would benefit from stating where the roof height is measured from (crest of weir). If possible, it would be best to reference the roof height by its level/absolute elevation so that users do not have to cha...
    Karen Chu 9 months ago in InfoWorks ICM / Hydraulics 4 Launched

    bottom opening

    Beside an upstanding vertical orrifice, it would be practical to be able to implement horizontal 'bottom holes' from one node to an underlaying node. e.g when a ditch can drain to an underlying conduit by means of a bottom opening. This might be a...
    Guest over 5 years ago in InfoWorks ICM / Hydraulics 4 Launched

    Incorporate ARR2019 Initial Loss & Continuing Loss (IL/CL) infilitration type for 2D Infiltration surfaces

    ICM currently allows 4 infiltration types in 2D infiltration types: -fixed -Horton -Constinf -GreenAmpt Australian Rainfall and Runoff 2019 talks default initial loss and continuing loss parameters for rural catchments, values for which which ca...
    Guest over 5 years ago in InfoWorks ICM / 2D Flooding / Hydraulics 1 Launched

    Pipe clash detection check

    Client feedback: an automatic check for colliding pipes would be highly appreciated to avoid nightmares in the construction.
    Guest almost 6 years ago in InfoWorks ICM / Hydraulics 2 Launched

    Minimum mesh element area

    As we are aware that "Minimum mesh area" will be used in calculating the results. However, presently there is no specific function that directly displays the min mesh element area generated and its associated element ID. Validation needs to be per...
    Guest over 2 years ago in InfoWorks ICM / Hydraulics 1 Launched

    Export 2D Result to Raster Grid of Depth and Hazard

    Damage Assesment tools (third-party) require depth and hazard raster grid input
    Guest over 6 years ago in InfoWorks ICM / 2D Flooding / Results 1 Launched

    section view of ground model and 2d mesh

    It would be very usefull to be able to generate a section view of both a ground model and a generated 2d mesh. At the moment this is only possible in a flood section after a simulation. So it should be not too difficult to move this possibility ...
    Richard Wilbrink about 3 years ago in InfoWorks ICM / 2D Flooding / Hydraulics / Terrain / Visualization 1 Launched

    Add sub-grid sampling functionality to the ICM 2D engine

    And sub-grid sampling visualizations, please :)
    Haddon Smith over 4 years ago in InfoWorks ICM / 2D Flooding / Mesh / Terrain 2 Launched

    MULTIPURPOSE 2D ZONE

    Often, I have to duplicate multiple zones to attach different attributes, such as level, roughness, infiltration and even mesh size, It would be so much more efficient to be able to include all these attributes in a single zone type. For example...
    Gregory Smith about 3 years ago in InfoWorks ICM / 2D Flooding 1 Launched

    Disclaimer: The development, release, and timing of any features or functionality described or discussed for our products in this User Feedback Forum for Autodesk Water Products and Services remains at our sole discretion. This User Feedback Forum for Autodesk Water Products and Services is not a commitment, promise, or legal obligation to deliver any functionality, is intended solely to outline and gather feedback about our general product direction, and should not be relied on in making purchasing decisions.

    Privacy | Cookie preferences