Autodesk
ADD A NEW IDEA

Clear

Ideas

    Showing 339 of 1442

    Infiltration Trench using BRE DIGEST 365 method

    The software needs to support for designing Infiltration trench method by using “BRE DIGEST 365”. I have checked the comparison between Infodrainage analysis Vs BRE digest 365 (manual calculation) and the results are not matching. Most of the proj...
    Guest about 2 years ago in InfoDrainage / Hydraulics 8 Gathering support

    Swale with pipe under connected by manholes

    Could not model real-life scenario where the pipe was under as conveyance for lesser events and raised via vented manholes into the swale above. Need integrated solution and was unable to model both and connect via manholes.
    Guest about 2 years ago in InfoDrainage / Hydraulics 1 Already exists

    Apply direct inflows to permeable paving

    There should be a way of applying the inflow that the paving receives directly (i.e. the rain that falls onto it) to produce a more accurate simulation of the rainfall. This direct rainfall isn't a lateral or point inflow, and being forced to mode...
    Craig Bobbett about 1 year ago in InfoDrainage / Hydraulics 0 For Review

    Microdrainge to Revit

    Make Pipes and Inlet available in Revit
    Guest over 3 years ago in InfoDrainage 0 Gathering support

    Switch design return periods when running cascade analysis

    I would like to be able to build a single cascade model & able run it for various design return periods instead of needing to create separate cascade models for each return period.
    Guest over 3 years ago in InfoDrainage 1 Already exists

    Status Bar to report more significant figures

    The status bar currently only displays levels (ground model level, water depth) to 1 decimal place. 2 Decimal places would be much more useful, Especially to ensure a node is at a low point or in the gutter invert..
    Guest over 3 years ago in InfoDrainage 1 Already exists

    Support Biodiversity net gain

    Support the ability to create a biodiversity metric for SuDS structures as per the Defra tool.
    Guest over 3 years ago in InfoDrainage 1 Gathering support

    Link to InfoAsset Asset Management Software

    Add a link to take drainage design data into Innovyze's InfoAsset Asset Management Software to complete the cycle of design - build - manage - maintain cycle.
    Guest over 3 years ago in InfoDrainage 1 Will not implement

    Import/export of asset data to/from CSV

    DSD import/export for MicroDrainage exists but HydroWorks is now dead. A more generic import/export would be beneficial for exchange of information with other drainage simulation packages and with GIS systems for existing networks; something simil...
    Guest over 3 years ago in InfoDrainage 1 Already exists

    Snap tool for areas

    Just like in CAD DrawNet you can use the CAD tools to snap the points of the catchment areas to specific points, it would be useful to have a snapping tool built into the MicroDrainage program. It could be a simple tool so you can either put a new...
    Guest over 3 years ago in InfoDrainage 1 Already exists

    Disclaimer: The development, release, and timing of any features or functionality described or discussed for our products in this User Feedback Forum for Autodesk Water Products and Services remains at our sole discretion. This User Feedback Forum for Autodesk Water Products and Services is not a commitment, promise, or legal obligation to deliver any functionality, is intended solely to outline and gather feedback about our general product direction, and should not be relied on in making purchasing decisions.

    Privacy | Cookie preferences