All ideas

Showing 254

Vary infiltration with depth

Cannot currently use the software for deisgn of borehole soakaways. By their very nature they wil have varying infiltration rates. Usually the infiltration is at greatest depth and no way of modelling with correct head in borehole.

Guest 11 months ago in InfoDrainage / Hydraulics 1 For Review

5 VOTE

Time of Concentration (TR-55) Calculator

Although the software has a TR-55 calculator for time of concentration, it doesn't work properly and also needs additional options added. Currently it isn't functional, because the software doesn't allow you to use only 1 or 2 of the 3 flow condit...

Nick Brewer over 1 year ago in InfoDrainage / Hydrology 2 For Review

3 VOTE

Allow underdrains to receive upstream flows from a pipe. Repair inflows to SuDS.

The SuDS nodes do not allow the inflows from an upstream pipe to connect directly to the underdrains. There are only options to connect them through no delays to subsurface areas (i.e. in bioretention nodes) or as a point inflow (i.e. filter drain...

Iwona Savas 11 months ago in InfoDrainage 0 For Review

2 VOTE

Support 64-bit TAB exporter

Support the extended 64-bit MapInfo TAB exporter to remove the 2GB file-size limit on the export.

Krzysztof Tchorzewski 7 months ago in Other Product Ideas / Asset Management 0 For Review

4 VOTE

Show preliminary sizing estimated flow depth in profile view.

The proportional depth is given in the Network Design Report but not shown in the long sections. This is a very useful feature to allow quick checking of throttling or spare capacity in the network.

Matthew Johnson about 1 year ago in InfoDrainage / Hydraulics 0 For Review

4 VOTE

Improve import to Civil 3D interface for multiple networks

When importing a second network into Civil 3D, the parts list option is locked and not the same as the parts list selected for the first network (both networks are within the same Infordrainage model).

Guest about 1 year ago in InfoDrainage / Civil3D Integration 0 For Review

2 VOTE

Right click menu on objects to graph, trace, edit, etc. Similar to ICM

I want to interact with my model primarily from the map rather than relying on toolbars. Namely, I want to select an object and then access an action menu to graph, edit, trace, label, etc on that object. Note: ICM already supports this feature, s...

Nathan Gerdts 8 months ago in InfoWorks WS Pro / Productivity 0 For Review

3 VOTE

Add (change template) inlet from template to a junction without erasing the part family for the existing object

For example, in a model exported from Civil 3D, HEC-22 inlets need to be added to 100s of structures. The workflow is: 1. Create an Object Template for the HEC-22 inlet2. Right click each structure and change template to add a HEC-22 inlet The pro...

Daniel'le DeVoss 11 months ago in InfoDrainage / Hydraulics 1 For Review

3 VOTE

Pressure Relief Valve

Which valve, if any, would represent a pressure relief valve? Where the pressure on the upstream is not allowed to exceed a certain psi. If it exceeds the specified pressure on the upstream side the valve will open.

Guest 11 months ago in InfoWater Pro / Operational Modeling 2 For Review

3 VOTE

Plan View Annotation - Choose no. decimal places on pipe gradient value etc.

Displaying pipe gradients on plan (from Display Settings), which can be exported to CAD, is a very useful feature. However, when displaying pipe gradients, in the form 1: X, the X value is shown to 2 decimal places by default. It would be really u...

Dara Magee 11 months ago in InfoDrainage / Visualization 0 For Review

Please enter your email address

FILTER BY CATEGORY